Using The Features; Basic Operation - Akai DLC-D1503L User Manual

USING THE FEATURES

Basic Operation

Tuning in the TV channels
1
After connecting an aerial to your LCD TV and connecting the mains cable to the TV and
230VAC mains socket, turn the POWER SWITCH of rear TV on, a orange light will show on
the front centre panel of the TV.
2
Press the button, the orange light will change to green and the First Time Installation
POWER
screen will show:
1. Make sure an aerial is fitted then press OK button on the remote to start
the Auto Programme Scan (APS).
2. In a short while you will see the TV programmes briefly as each channel is received and
stored in the memory. When APS is completed CH1 digital TV will show, press CH+/-
buttons to view the other channels stored. To view analogue TV press Source button and
use the up / down arrow buttons to select TV and then Press the OK button.
Change channels by pressing the CH +/- buttons.
3
To power off press the
Selecting a source
Press the button to display the function required (TV/AV).
SOURCE
Using the arrow buttons on the remote highlight the function required and press the OK button
to select the function.
Select TV Channel
1
Press the button on the remote control and the
CH.+/-
TV to change the TV channels.
2
You can directly select the TV channel required by pressing 1,2 or 3 etc on the remote button pad.
Adjusting the Volume
Press the button on the remote control or the
VOL. +/–
the volume.
To Mute the Sound
1 Press and the sound cuts off.
MUTE
2 To turn mute off, press the
Sleep Timer
Press the button continuously to select the sleep timer or turn the sleep timer from the
SLEEP
OFF,15,30,60minutes; when the LCD TV has reached the set time, it will automatically turn off.
If the TV has no input signal, it will automatically power down to standby after 15 minutes.
button, the green light will change to orange.
POWER
button again, or simply press the
MUTE
▲/▼ button on the LCD
CH.
button on the LCD TV to adjust
VOL. +/-
VOL +/-
USING THE FEATURES
button.
17