DEHUMIDIFIER
The Clean Comfort™ DV090 dehumidifier
performs multiple functions in a compact
enclosure: high-capacity dehumidification,
fresh air ventilation, and particulate filtration.
Dehumidification
The highly efficient DV090 dehumidifier utilizes
refrigeration to cool the incoming air stream
below its dew point. This cooled and drier air
is used to pre-cool the incoming air stream
resulting in increased overall efficiency. After the
pre-cooling stage the processed air is reheated
by passing through the condenser coil.
Fresh Air Ventilation (Optional)
Fresh outdoor air may be ducted to the
dehumidifier. This provides fresh air to dilute
indoor pollutants and replenish oxygen
content in the building. The amount of fresh
air ventilation can be regulated by a variety
of dampers and controls in order to provide
desired ventilation rates.
Air Filtration
The DV090 features air filtration, using a
MERV-11 media filter, to improve indoor
air quality.
i
IMPORTANT: READ AND SAVE THESE INSTRUCTIONS. THIS GUIDE TO BE LEFT WITH EQUIPMENT OWNER
IO-DV090
DV090 VENTILATING
DEHUMIDIFIER
Installation and Operation Manual
WWW.CLEANCOMFORT.COM
Clean Comfort DV090
2/14
Need help?
Do you have a question about the DV090 and is the answer not in the manual?
Questions and answers
Can this be installed on a floor or shelf next to the furnace (forced air gas)?
The CLEAN COMFORT DV090 can be installed on a floor or shelf next to a forced air gas furnace as long as the installation follows the required clearances for ductwork, filter removal, and electrical accessibility. The unit should have enough clearance for proper operation and maintenance, including a minimum of 15 inches on the side for filter removal. Additionally, it must be connected to a 115VAC outlet with a minimum 15A circuit capacity.
This answer is automatically generated