Related Manuals for Babybee noa
Summary of Contents for Babybee noa
- Page 1 IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE babybeeonline.com Complies with AS 4684:2009 and EN14988:2017...
- Page 2 Congrats, you’ve just joined the NOA club!
- Page 3 3 to 5 years of age. Return Policy Support If you decide that the NOA Convertible If at any stage you require assistance High Chair is not the perfect fit for with set up or use, please refer to the your family, we offer a Free Return NOA product page on our website.
-
Page 4: Safety Warnings
Safety Warnings This Babybee NOA convertible high consistenly sitting upright. chair is tested to comply with AS • Always use the restraint system of 4684:2009 and EN14988:2017 safety this high chair. requirements. Please read and follow the below • Use this high chair on a flat, even... - Page 5 • Be aware of the risk of tilting when your child can push their feet against a table or any other structure. • When high chair is not in use, store away from children. • Ensure you follow the maintenance and cleaning instructions as included in this instruction manual and care labels on the product.
-
Page 6: Table Of Contents
Contents Safety Warnings Features & components What’s in the box? Assembling the cross-brace Installing the legs Installing the footrest Attaching the seat Installing the crossbar support Handy harness tips Assembling & installing the tray Converting to toddler chair Maintenance tips Warranty... -
Page 7: Features & Components
Features & Components Seat Top Easy-Clean Tray Seat Liner Footrest Legs Support Crossbar Base Tray Harness with Harness Covers... -
Page 8: What's In The Box
What’s in the box? Please check that you have all the correct parts before getting started. 1 x Seat (A) 1 x Seat Liner (B) 2 x Cross Brace Bars (C) 4 x Legs (D) 1 x Harness with Harness Covers (E) 1 x Footrest (F) 1 x Support Bar (G) 1 x Base Tray (H) - Page 10 Let’s get this high chair good to go! 1. Assemble the cross-brace for underneath the seat Slot the cross-brace bars (C) together using the notches in the centre of each piece Secure pieces together in the centre hole by using screw (S2) and the small allen key (N) ensuring you put the screw in from underneath as below...
- Page 11 2. Install the high chair legs The legs with the holes in the side are the Handy front legs - this is where the footrest will Hint! attach. These must be next to each other. Before continuing, flip the cross brace back the right way so that the screw is facing the ground.
-
Page 12: Installing The Footrest
2. High chair legs cont. Align the top of each leg (D) with one end of the wooden cross brace (C) put together in Step 1. Using a flat head screwdriver, insert the bolt nut (K) into the bolt nut hole in the side of the leg. -
Page 13: Attaching The Seat
4. Attaching the seat IMPORTANT! The seat liner and harness will come semi-attached to the seat. You will need to slip the back flap of the seat liner over the back of the seat and check that all 5 ends of the harness are correctly fitted through the seat liner AND the plastic seat before continuing on with your set-up. -
Page 14: Handy Harness Tips
Handy Harness Tips 1. Securing the harness Place your child in the NOA seat and place their arms through the shoulder straps. Pull up the crotch harness strap and clip both waist strap clips into the centre buckle on the crotch strap. - Page 15 3. Adjusting the harness The harness straps can be adjusted to suit the size of your child. Depending on your child’s height, thread the shoulder strap through the appropriate slot on the seat and seat liner. Adjust the strap length using the buckle on each strap as required to shorten or lengthen.
- Page 16 4. Removing the harness To remove the harness, simply thread each strap back through the slot in the seat and seat liner. Handy Slide the harness straps through at an angle to help them Hint! slip through the slots in the plastic seat. 5.
-
Page 18: Assembling & Installing The Tray
The NOA comes with a double tray for easy cleaning. To remove the top tray, simply lift and pull the flap on either side of the top tray whilst holding down the bottom tray. - Page 19 Always use the top tray during meal times to maintain Handy the clean appearance for the lifetime of your NOA. Hint! Refer to the detailed care instructions on page 22. TO AVOID FINGER ENTRAPMENT, KEEP YOUR CHILDREN’S FINGERS CLEAR OF BOTH TRAYS WHEN ADJUSTING OR REMOVING ENSURE ALL SCREWS ARE FULLY TIGHTENED BEFORE USING THE HIGH CHAIR.
-
Page 20: Converting To Toddler Chair
Converting to toddler chair Three claps for your little one! They’ve graduated from high chair life and are ready to take a seat in their toddler chair. Remove the tray from the high chair. Unscrew the black feet stoppers (L) from the bottom of each of the high chair legs and screw onto the bottom of each of the shorter toddler chair legs. - Page 21 Using a flat head screwdriver, insert the bolt nut (K) into the bolt nut hole in the side of the toddler leg. Insert the connecting leg screws (S4) into the screw hole and tighten using the small allen key (N). Fix the seat (A) to the base/legs by aligning the holes in the underside of the seat with the holes in the top of...
- Page 22 Keeping your NOA in tip-top shape Keep your NOA in good working condition and ensure that it lasts as long as possible with regular maintenance. Regular maintenance Accessories and Replacement Parts should include: Do not use parts or accessories that...
- Page 23 Customer dissatisfaction with the then determine the best way to resolve product in terms of fit, weight, any defects or faults. Babybee reserves functionality, colour or design. the right to repair, exchange or replace the damaged item with a replacement part.
- Page 24 Designer style. Unbeatable value. Model: NOA Convertible High Chair. Version: 1 - Dec 2021. Information subject to change. Please see website for current version. babybeeonline.com...