Disassembly - Marantz AV7702 Service Manual

DISASSEMBLY

• Remove each part in the order of the arrows below.
• Reassemble removed parts in the reverse order.
Read "PrecautionsnDuringnWork" before reassembling removed parts.
•
• If wire bundles are removed or moved during adjustment or part replacement, reshape the wires after completing
the work. Failure to shape the wires correctly may cause problems such as noise.
FRONT PANEL ASSY
See "DISASSEMBLY"
1. FRONT PANEL ASSY
and "EXPLODEDnVIEW"
FRONT PCB
(Ref. No. of EXPLODED VIEW : C5)
HEAD PHONE PCB
(Ref. No. of EXPLODED VIEW : C2)
FRONT SWE PCB
(Ref. No. of EXPLODED VIEW : C1)
FRONT HDMI PCB
(Ref. No. of EXPLODED VIEW : C3)
GUIDE FFC1 PCB
(Ref. No. of EXPLODED VIEW : C11)
FRONT HDMI FFC CABLE PCB
(Ref. No. of EXPLODED VIEW : C7)
RADIATOR ASSY
See "DISASSEMBLY"
2. RADIATOR ASSY
and "EXPLODEDnVIEW"
H-DAM PCB
(Ref. No. of EXPLODED VIEW : C10)
GUIDE PCB
(Ref. No. of EXPLODED VIEW : C9)
TOP COVER
DIGITAL PCB ASSY
See "DISASSEMBLY"
3. DIGITAL PCB ASSY
and "EXPLODEDnVIEW"
DIGITAL PCB
(Ref. No. of EXPLODED VIEW : C37)
GUIDE FFC2 PCB
(Ref. No. of EXPLODED VIEW : C36)
CX870MIDDLE PCB
(Ref. No. of EXPLODED VIEW : C39)
CX870MODULE
(Ref. No. of EXPLODED VIEW : C40)
VIDEO PCB ASSY
See "DISASSEMBLY"
4. VIDEO PCB ASSY
and "EXPLODEDnVIEW"
VIDEO PCB
(Ref. No. of EXPLODED VIEW : C35)
INPUT PCB ASSY
See "DISASSEMBLY"
5. INPUT PCB ASSY
and "EXPLODEDnVIEW"
INPUT PCB
(Ref. No. of EXPLODED VIEW : C30)
XLR PCB ASSY
See "DISASSEMBLY"
6. XLR PCB ASSY
and "EXPLODEDnVIEW"
XLR PCB
(Ref. No. of EXPLODED VIEW : C16)
FRONT CNT PCB
(Ref. No. of EXPLODED VIEW : C13)
SIDE CNT PCB
(Ref. No. of EXPLODED VIEW : C14)
FUSE PCB
(Ref. No. of EXPLODED VIEW : C12)
11
SMPS PCB
See "DISASSEMBLY"
7. SMPS PCB
and "EXPLODEDnVIEW"
SMPS PCB
(Ref. No. of EXPLODED VIEW : C22)
MAIN TRANS
See "DISASSEMBLY"
8. MAIN TRANS
and "EXPLODEDnVIEW"
TRANS,POWER
(Ref. No. of EXPLODED VIEW : C21)