Download Print this page

Specifications; Manufacturer Declarations - Sennheiser IE 900 Instruction Manual

High-end in-ear earphones
Hide thumbs Also See for IE 900:

Advertisement

English | IE 900

Specifications

Transducer principle
dynamic, Extra Wide Band (XWB)
Transducer size
7 mm
Frequency response
5 to 48,000 Hz
Frequency
diffuse-field equalized
characteristic
Ear coupling
in-ear, closed
Impedance
18 Ω
Sound pressure level
123 dB at 1 kHz, 1 Vrms
THD
< 0.05% (1 kHz, 94 dB)
Attenuation
–26 dB
oxygen-free copper cable (OFC), para-aramid
Cable
reinforced, ear hooks: TPU-coated
gold-plated;
on the earphones: MMCX connector
Connectors
on the device: stereo jack plugs
(see pin assignment
3.5 mm, unbalanced, 3-pin
on inside cover page)
2.5 mm, balanced, 4-pin
4.4 mm, balanced, 5-pin
Weight
approx. 4 g per ear canal phone (without cable)
Operating
–10°C to +55°C
temperature
Maximum value of the
static magnetic field
1.3 mT
at the surface
8

Manufacturer declarations

For information on regulatory compliance markings, see the inside back cover.
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on
this product. For the current warranty conditions, please visit our website at
www.sennheiser.com or contact your Sennheiser partner.
The Australia and New Zealand Warranty Conditions can be found on the inside
back cover.
In compliance with the following requirements
• General Product Safety Directive (2001/95/EC)
Compliant to Sound Pressure Limits according to country specific requirements.
EU/UK declaration of conformity
• EU: RoHS Directive (2011/65/EU)
• UK: RoHS Regulations (2012)
The full text of the EU declaration of conformity is available at the following
internet address: www.sennheiser.com/download.
Notes on disposal
• EU: WEEE Directive (2012/19/EU)
• UK: WEEE Regulations (2013)
The symbol of the crossed-out wheeled bin on the product, the
battery/rechargeable battery (if applicable) and/or the packaging indicates that
these products must not be disposed of with normal household waste, but must
be disposed of separately at the end of their operational lifetime. For packaging
disposal, please observe the legal regulations on waste segregation applicable
in your country.
Further information on the recycling of theses products can be obtained from
your municipal administration, from the municipal collection points, or from
your Sennheiser partner.
The separate collection of waste electrical and electronic equipment, batteries/
rechargeable batteries (if applicable) and packagings is used to promote the
reuse and recycling and to prevent negative effects caused by e.g. potentially
hazardous substances contained in these products. Herewith you make an
important contribution to the protection of the environment and public health.

Advertisement

loading