Key Programming; Vehicle Connection - Xtool IK618 User Manual

4 K P
EY ROGRAMMING
The key programming software inside IK618 app can get access to the
immobilizer system inside the vehicles and supports multiple functions like
key programming, generate dealer key, all key lost, immobilizer reset or
changing, EEPROM chip coding and much more.
 For different manufacturers, the menu inside each software and the supported
functions will be different. We suggest checking the support list inside our official
software first or ask XTOOL aftersales services if you have any questions.

VEHICLE CONNECTION

To start the key programming process, the VCI communication box should
establish communication with the vehicle, and Bluetooth should be
connected between the tablet and the VCI box. Please follow the steps
below.
1. Turn on the tablet.
2. Connect the vehicle to the tablet following the diagram below.
Usually, the OBD port is normally located under the dashboard,
inside driver's footwell.
3. Click into the menus to perform the functions.
 The main cable will charge the tablet when connecting to the vehicle.
 Some older vehicles are not using the OBD2-16 port, please make sure you're
using the correct connector. If necessary, contact your dealer if you need other
connectors.
14