Table of Contents
Advertisement
Chapter III Accessing the Network Camera
The camera must be assigned an IP address to be accessible.
3.1 Assigning An IP Address
The Network Camera must be assigned an IP address to be accessible. The default IP address of
Network Camera is 192.168.5.190.
You can either change the IP address of the camera via Smart Tools or browser. Please connect the
camera in the same LAN of your computer.
3.1.1 Assigning An IP Address Using Smart Tools
Smart Tools is a software tool which can automatically detect multiple online network cameras
connected in the LAN, set IP addresses, and manage firmware upgrades. It's recommended when
assigning IP addresses for multiple cameras.
Step1: Install Smart Tools (The software could be downloaded from our website);
Step2: Start Smart Tools, click the IPC Tools page, then enter the device information including IP
address, MAC address, Status, Port number, Netmask, and Gateway of all network cameras
will be displayed. Details are shown as shown below;
BS-IPT4002LPR / BS-IPT4012LPR USER GUIDE
5
Advertisement
Table of Contents
