Removal And Installation; Turbocharger Weights; Removing The Turbocharger - ABB HT537477 Operation Manual

Operation Manual / TPR56-F + TPR61-F
7 Removal and installation / 7.1 Turbocharger weights

7 Removal and installation

7.1 Turbocharger weights

Weight [kg]

7.2 Removing the turbocharger

© Copyright 2018 . All rights reserved.
Lifting gear with a sufficient load limit must be used for removing and
installing the turbocharger. The following weight specification is the
heaviest variant possible. This standard value may deviate from the data
on the rating plate depending on the specification.
TPR56-F..
360
Disconnect all gas, air and oil pipes in accordance with the engineb-
u
uilder's instructions.
CAUTION
Oil orifice plates
An orifice plate for adjusting the oil pressure is fitted in each of the two
oil inlet channels in the bearing casing. When the cartridge group, the
bearing casing or the turbocharger is fitted to the engine, it must be
ensured that the orifice plates that are specified for the turbocharger
have been installed in the two oil inlet channels.
Check correct installation of oil orifice plates.
u
HZTL2490_EN
TPR61-F..
700
Revision D May 2018