Playback Using The Remote Control - JVC Everio GZ-MG40U Instructions Manual

Playback Using the Remote Control

The full-function remote control unit can operate
this camera from a distance as well as the basic
operations (playback, stop, pause, fast-forward
and rewind) of your VCR.
Installing the Battery
The remote control uses
one lithium battery
(CR2025).
1
Pull out the battery
holder by pushing the lock
tab.
2
Insert the battery in the
holder, and be sure to have the "+" mark visible.
3
Slide the holder back in until you hear a click.
Beam Effective Area
When using the remote
control, be sure to point it at
the remote sensor. The
transmitted beam's
approximate effective
distance for indoor use is 5 m
(16 ft).
Use the remote control in
front of the camera facing
toward the lens.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
2
1
1
Lock tab
Remote sensor
VIDEO RECORDING & PLAYBACK
Buttons and Functions
A
Infrared Beam Transmitting Window
● Transmits the beam signal.
B
ZOOM (T/W) Buttons
Zoom In/Out ( pg. 23)
C
Up Button
Rotate Button (clockwise) (
D
Skip Backward Button
E
Left Button
F
Back Button
G
PLAYLIST Button (
H
START/STOP Button
I
SNAPSHOT Button (
J
INFO Button ( pg. 38)
K
Skip Forward Button
L
PLAY/PAUSE Button
M
Right Button
N
Next Button
O
Down Button
Rotate Button (counterclockwise) (
P
INDEX Button
Q
DATE Button
27
EN
pg. 30)
pg. 42)
pg. 28)
pg. 30)