Table of Contents
Advertisement
Quick Links
For use with the following starting serial numbers:
BDHP900
BDHP9B
BDHP1100
BDHP11B
Owner/Operator Manual
BDHP 9' & 11'
Disc Harrows
ATTENTION:
ALL WARRANTY WORK MUST BE APPROVED
BY BROWN MFG. CORP.
BEFORE WORK BEGINS
Before operating your machine,
stop and read this owners manual.
Do not attempt to operate the unit
until you fully understand the
material covered in this manual.
Without the knowledge contained
in this manual, injury or death can
result.
WARNING
Advertisement
Table of Contents
Related Manuals for BROWN BDHP900
Summary of Contents for BROWN BDHP900
- Page 1 BDHP900 BDHP9B Disc Harrows BDHP1100 BDHP11B ATTENTION: ALL WARRANTY WORK MUST BE APPROVED BY BROWN MFG. CORP. BEFORE WORK BEGINS Owner/Operator Manual WARNING Before operating your machine, stop and read this owners manual. Do not attempt to operate the unit until you fully understand the material covered in this manual.
- Page 2 Copyright Copyright ©2000 Brown Manufacturing Corporation. All photos and illustrations are property of Brown Manufacturing Corporation. This publication may be freely reproduced, either in whole or in part, provided that the content herein is not altered. Cover Pictured: Model BDHP-900 disc harrow.
-
Page 3: Table Of Contents
Contents Warranty Statement ......................4 Owner Registration ......................5 Equipment Safety ......................7 Assembly........................13 Operation ........................17 Troubleshooting ......................18 Specifications ......................... 19 Parts Listing ........................20 Replacement Parts ......................22... -
Page 4: Warranty Statement
The obligation of Brown shall be limited to replacing or repairing the detective product, at the option of Brown. Brown shall not be responsible for any labor or cost of removal or repairing or reinstallation of its products and shall not be liable for transportation costs to and from its plant in Ozark, Alabama. -
Page 5: Owner Registration
D a t e P u r c h a s e d , a n d Dealer Information for future Serial No.: _______________________ reference. For further information: Date Purchased: ____/____/_____ Brown Manufacturing Corp. 6001 E. Hwy 27 Dealer: __________________________ Ozark, AL 36360 Phone: (334) 795-6603 Toll Free: (800) 663-8909 FAX: (334) 795-3029 www.brownmfgcorp.com... - Page 6 Please use envelope.
-
Page 7: Equipment Safety
Equipment Safety Warning: Read this manual before operation. Operators of the equipment must read and understand this manual. Failure to read this manual and follow these safety and operating instructions could result in serious bodily injury or even death. WARNING Before operating your machine, stop and read this owners manual. - Page 8 Unauthorized modifications to the equipment are not recommended. This could impair the function, safety, and life of the machine. • For any part of this manual that you do not understand, contact your dealer or Brown Manufacturing Corporation at (800) 633-8909. •...
- Page 9 Equipment Safety Safety Decals The following safety decals should be attached to the equipment at all times. Should any decal become damaged or lost, it is the responsibility of the owner to replace it. Additional decals may be obtained from the manufacturer. WARNING ADVERTENCIA Antes de probar la unidad por primera vez...
- Page 10 Equipment Safety Warning! Prepare for WARNING emergencies. Prepare for Keep fire extinguisher and first aid kit available. Fire emergencies. Keep fire extin- guisher and first aid kit available. Warning! Check equipment WARNING before operating. Check equipment Tighten all nuts and bolts before operating. Make before operation.
- Page 11 Equipment Safety Warning! Transport with WARNING care. Transport with care. Before transporting to a new location, make Use slow-moving certain that the slow-moving vehicle emblem is vehicle emblem installed and is clearly visible. Use flashing lights and flashing light. and follow local traffic regulations. Follow local traffic regulations.
- Page 12 Equipment Safety Reflective Markings Yellow Retroreflective Tape, Part # 500-237-0002, on Left Front Corner. 2”x 9”, Zero to 16” from ends. Red Retroreflective Tape, Part Number 500-237-0001, on Rear 2”x 9”, zero to 16” from ends.
-
Page 13: Assembly
Assembly Brown Disc Harrows Brown Pull Type Disc Harrows come partially assembled, please check all fasteners to ensure correct torque before use and after two hours of use. Tongue assembly Step 1: Pin rear of tongue to cooresponding mounting holes in frame. - Page 14 Assembly...
- Page 15 Assembly 3/4” x 5 1/2”...
- Page 16 Assembly Blade Scraper Assembly DH-197 WITHOUT FURROW FILLER EXTENSION DH-196 DH-195 DH-188L WITH FURROW FILLER EXTENSION DH-900-A6 DH-122 Furrow Filler Attachment...
-
Page 17: Operation
Operation Before hitching harrow to your tractor, make sure all safety devices are installed on the tractor. STOP Please follow all safety instructions and procedures. Attach equipment to tractor. Be sure the tractor is equipped with the correct category hitchpins, top link, etc. Be extremely careful when positioning tractor to hitch to the equipment. -
Page 18: Troubleshooting
Troubleshooting Problem Possible Cause(s) Possible Solution(s) 1. Excessive Speed 1. Reduce speed Leaving center ridge 2. Rear gangs cut too deep 2. Reduce gang angle 3. Top link too long 3. Shorten top link 1. Insufficent speed 1. Increase speed 2. -
Page 19: Specifications
Specifications No./Dia. Approx. Model Spacing Weight Blades Width Cut Bearings BDHP-900-2422 24/22 9’3” 2544 lbs. BDHP-900-2622 26/22 8’11” 2610 lbs. BDHP-1100-3022 30/22 12’2” 3109 lbs. BDHP-1100-3222 32/22 11’ 3146 lbs. Standard Features 3” x 3”, 3” x 4” high tensile steel tube frame Triple-sealed ball bearings Self-aligning bearing housings 1 1/8”... -
Page 20: Parts Listing
Parts Listing See Pages 26 - 27 for additional pin information. Ref. No. Part No. Qty Required Description 234-1105 9/11ft Disc Harrow Frame, Pull 234-1020 Tongue Assembly - Pull Type 234-1070 Double Clevis Drawbar Hitch - uses TC-126K pins 234-1400 Hydraulic Hose Tender (See Page 22 for bolts) 234-1030 Axle Retainer... - Page 21 Parts Listing Ref. No. Part No. Qty Required Description 234-5560 Tire & Wheel 9.5L15 HSP31 8 Ply 6 on 5.5” BC 255-6500 Unit Bearing Hub 6 on 5.5 BC not shown MCS14F45Z 3 per bearing Unit Bearing Mounting Bolts M14x1.5x45x10.9Gr. not shown LNM1415Z 6 per wheel...
- Page 22 Parts Listing See Pages 26 - 27 for more Pin information. Ref. No. Part No. Qty Required Description 234-1070 Double Clevis Drawbar Hitch - uses TC-126K pins TC-126K Cat II Lift Pin (TC-126) with Lynch Pin (TC-126A) UT-207A 1” x 6” Hitch Pin (To Tractor) 234-1400 Hydraulic Hose Tender HC512C32Z...
- Page 23 Parts Listing Ref. No. Part No. Qty Required Description 225-0027 Safety Chain not shown 255-0009 Square Washer, 1/2” not shown HC88C32S Bolt, 1/2”-13 x X “ Grade 8 Zinc not shown NSB50CZ Sotver Lock Nut 1/2”-13 Grade 5 Zinc 234-1050 Axle-Lift Arm - Pull Type MH-01 Manual Holder Tube...
-
Page 24: Replacement Parts
Replacement Parts Ordering replacement parts Please contact the nearest Brown dealer for replacements parts. They will be able to meet most of your equipment needs. - Page 25 For Furrow Filler 14” Plain Disc Blade 1” Round Hole DH-116-16 DH-112A 16” Plain Disc Blade 1” Round Hole Ordering replacement parts Please contact the nearest Brown dealer for replacements parts. They will be able to meet most of your equipment needs.
- Page 26 Replacement Parts Ordering replacement parts Please contact the nearest Brown dealer for replacements parts. They will be able to meet most of your equipment needs.
- Page 27 Replacement Parts Ref. No. Part No. Qty Required Description HN258CZ 3 per Hanger Assy Nut, Hex 5/8” NC GR2 Zinc LOC58Z 3 per Hanger Assy Washer, Lock 5/8” Zinc HC510C104Z 3 per Hanger Assy Bolt, 5/8” X 6 1/2” NC GR5 For Bearing Hangers DH-1254B Bearing Hanger Assembly with fasteners.
- Page 28 Replacement Parts See Page 16 for Assembly Instructions of Scrapers DH-191A Balk Breaker Assembly Parts Breakdown...
- Page 29 Replacement Parts Ref. No. Part No. Description 225-0027 Safety Chain 255-0009 Square Washer 1/2” - .25x1.5x1.5 Round hole HC88C32Z 1/2”-13 x 2” Grade 8 Bolt NSB50CZ Stover Lock Nut 1/2”-13 Grade 5 Zinc DH-900-A6 Furrow filler extension DH-197 U-Bolt (1/2” x 4” x 4”) DH-196 U-Bolt (1/2”...
- Page 30 Notes...
- Page 31 Thank You for purchasing a Brown Disc Harrow.
- Page 32 Pull Type Tandem Disc Harrow Version 1.2.0 July 2022...