Related Manuals for Bosch PMD83D31NX
Summary of Contents for Bosch PMD83D31NX
- Page 1 Built-in gas hob PMD83D31NX PMD83D51NX User manual and installation instructions [en]...
-
Page 2: Table Of Contents
en Safety ¡ In private households and in enclosed Table of contents spaces in a domestic environment. ¡ Up to an altitude of max. 2000 m above sea level. INFORMATION FOR USE Do not use the appliance: Safety .............. 2 ¡ On boats or in vehicles. ¡... -
Page 3: Safety
Safety en The appliance becomes very hot, fabrics and WARNING ‒ Risk of explosion! other objects may ignite. Escaping gas may cause an explosion. WHAT ▶ Keep fabrics (e.g. garments or curtains) TO DO IF YOU SMELL GAS OR IF THERE away from the flames. ARE FAULTS IN THE GAS INSTALLATION ▶... -
Page 4: Avoiding Property Damage
en Avoiding property damage An ingress of moisture can cause an electric Cracks or fractures in the glass surface are shock. dangerous. ▶ Do not use steam- or high-pressure clean- ▶ All of the burners and each electrical heat- ers to clean the appliance. ing element switch off immediately and dis- The insulation on cables of electrical appli- connect the appliance from the power sup-... -
Page 5: Environmental Protection And Saving En- Ergy
Cover saucepans with Cooking without a lid con- suitable lids. sumes far more energy. 4 Applicable standards BS EN30-1-1:2008 5 Technical specifications Product no. PMD83D31NX PMD83D51NX Gas type Rated gas pressure 2942 Pa 2942 Pa External dimensions (WxDxH) 780 x 450 x 150 mm 760 x 466 x 150 mm... -
Page 6: Familiarising Yourself With Your Appliance
You can find an overview of the parts of your appliance You can use the control panel to configure all functions here. of your appliance and to obtain information about the operating status. PMD83D31NX Pictogram Description ... - Page 7 Using cookware en Ignition plug Burner cover Thermocouple for the flame monitoring Burner head Ignition plug 6.4 Small burner Thermocouple for the flame monitoring You can find an overview of the parts of the burner here. 7 Using cookware The selection and positioning of cookware affects the Do not use deformed safety and energy efficiency of your appliance.
-
Page 8: Using Cookware
en Basic operation Place cookware onto the Handle the cookware that pan supports. Never is on the hob carefully. place cookware directly Do not bang on the hob. on the burner. Before us- Do not place heavy ing the appliance, ensure weights on the hob. -
Page 9: Cleaning And Servicing
Cleaning and servicing en 8.3 Starting the hob 8.4 Starting the hob after safety switch-off Your hob features automatic fast ignition. Requirement: The safety device shuts off the gas sup- ply to the burner if the flame is unintentionally extin- Note: Ensure that there is no leakage before operation. guished. -
Page 10: Troubleshooting
en Troubleshooting Only use the cleaning gel on the pan supports ATTENTION! ▶ On the burner parts, the controls and the aluminium and stainless steel surfaces. surfaces, the cleaning gel leads to damage. Apply the cleaning gel to the burnt-on dirt. If necessary, let the dirt soak overnight. -
Page 11: Customer Service
Customer Service en Fault Cause and troubleshooting Short and weak Low gas pressure. flame. Open the gas valve fully, or replace the gas cylinder. ▶ Long and yellow Burner openings are blocked. flame. Clean the burner openings. ▶ Red flame. Gas supply contains impurities, or the ambient air is damp. No action required. - Page 12 en Installation instructions This appliance is not connected to a combus- 12.3 Gas connection instructions tion products evacuation device. It shall be in- Please observe these precautions to ensure safe and stalled and connected in accordance with cur- reliable connection of the appliance. ¡...
- Page 13 Installation instructions en Incorrect repairs are dangerous. Note: Check the technical specifications of the ap- Repairs to the appliance should only be carried out pliance and select the cavity dimensions corres- ▶ by trained specialist staff. ponding to the model. Only use genuine spare parts when repairing the ▶...
- Page 14 en Installation instructions 12.10 Gas leak test Use soapy water to test for leaks Use a soft brush dipped in soapy water to coat the connecting section of the gas pipeline. Open the gas valve and carefully observe whether bubbles form. If bubbles form, close the gas valve immediately. Adjust the leaking connecting section.
- Page 16 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.