Table of Contents
Advertisement
4 Assembly
4.1 General
The Enmix Light is an unfinished product, and consequently the manufacturer cannot install all the
required safety devices such as control logic or an emergency stop. It is, therefore, important that the
approved installer takes care of these requirements.
4.2 Installation instructions
Please make sure that the Enmix Light is out of reach of children at all times.
Advice with regard to dosage rates and types of fertilizer should be obtained from your supplier.
•
Make sure the fluid reservoir which the Enmix light is mounted to is placed on a stable surface.
•
Make sure that the Enmix Light is firmly attached to the fertilizer bin or container.
•
Make sure at all times that the mixing disc can rotate freely.
•
Make sure that contact with the agitator-mixer is prevented by placing a safety grid or lid on the
fertilizer bin or container.
During each phase of the assembly the approved installer or the user must ensure that he or she can
work safely. The use of a stepladder or the helping hand of an extra person or persons will make
assembly of the machine easier and safer.
4.3 Delivery checklist
Make sure all components have been delivered prior to commencing assembly. The Enmix light will be
assembled at the supplier before shipping. At every batch of Enmix light there will be an assembly
manual attached.
IBAN NL71 RABO 0340341610 · KvK Den Haag 27230471 · Btw-nummer NL8000.78.378.B01 · info@vanderendegroep.nl · www.vanderendegroep.nl
Pagina 11 van 16
Van der Ende Groep. · Aartsdijkweg 23, 2676 LE, Maasdijk · Telefoon 0174 515050
Advertisement
Table of Contents
