Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Nordic RO-B0118E
Summary of Contents for Nordic RO-B0118E
- Page 1 18V BRUSHLESS ROTARY-SANDER OPERATING MANUAL RO-B0118E...
-
Page 2: Product Specification
NORDIC PRODUCT SPECIFICATION Voltage: No Load Speed: 6000/8500/11000 Base Diameter: 125mm Vibration: 4.451m/s , K=1.5m/s A weighted sound pressure level: LpA: 73dB(A) ; KpA=3dB(A) A weighted sound power level: LwA: 84dB(A) ; KwA=3dB(A) GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury. -
Page 3: Electrical Safety
NORDIC 2.2 ELECTRICAL SAFETY • Always check that the power supply corresponds to the voltage on the rating plate. • Power tool plugs must match the outlet. Never modify the plug in any way. Do not use adapter plugs with earthed power tools. -
Page 4: Noise/Vibration Information
NORDIC 2.4 POWER TOOL USE AND CARE • Do not expect the power tool to do more than it can. Use the correct power tool for what you want to do. A power tool will achieve better results and be safer if used in the context for which it was designed. -
Page 5: Additional Safety Instructions For Batteries And Chargers
NORDIC 2.5 SERVICE Your power tool should be serviced by a qualified specialist using only standard spare parts. This will ensure that it meets the required safety standards. a) Use only the manufacturer’s recommended replacement parts and accessories. b) Inspect and maintain the machine regularly. Have the machine repaired only by an authorized repairer. - Page 6 NORDIC • Do not heat. If batteries are heated to above 100 °C, sealing and insulating separators and other polymer components may be damaged resulting in electrolyte leakage and/or internal short circuiting leading to heat generation causing rupture or file. Moreover do not dispose of the batteries in fire, explosion and/or intense burning may result.
-
Page 7: Operation
NORDIC In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated; Earthing wire is therefore not necessary (only for charger) Ambient temperature 40°C max. (only for battery) Do not expose charger and battery pack to water... -
Page 8: Fitting The Dust Bag
NORDIC Plug the charger adapter into power source. The green light on the charger stand will illuminate, indicating the charger is powered. Slide the battery all the way into the charger stand.The red light on the charger stand will illuminate, indicating that the battery is charging. -
Page 9: Dust Suction
NORDIC CAUTION: For health reasons it is imperative that you use the dust collection box or a dust extraction system. For others material, always work with the dust extraction device! FIT AND REMOVE THE SANDING SHEET Perforated sanding sheets are used for dust suction. Please always make sure the sheet corresponds with perforation in sanding foot. -
Page 10: Cleaning And Maintenance
NORDIC CLEANING AND MAINTENANCE DANGER! Always pull out the mains power plug before startingany cleaning work. CLEANING Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure. - Page 11 NORDIC Speed control button Oscillating plate Off switch Dust bag PLEASE NOTE: Battery & Charger sold seperately. Release button(battery pack) 4.0Ah Battery pack(not included)
- Page 12 NORDIC...
Need help?
Do you have a question about the RO-B0118E and is the answer not in the manual?
Questions and answers