The can opener is designed only for opening cans. 0.25 kg to 10 kg cans may be opened with the can opener. Technical data Description Can opener KB330 A120350 Code-No.: CNS 18/10, aluminium, plastic; Material: Work surface: CNS 18/10, painted;...
Page 4
Washers M6x15 screws Additional accessories (not included in the delivery!) Knife KB330 Transport wheel KB330 • Material: stainless steel • Material: stainless steel • Dimensions: W 20 x D 17 x H 50 mm • Dimensions: W 38 x D 38 x H 10 mm •...
Operation Prepare the device Unpack the device and remove and dispose of all package materials according to the environmental protection regulations. Select an appropriate place for mounting the can opener. The tabletop thickness may not exceed 45 mm. ...
Page 6
4. Insert the square pipe of the can opener to the hole in the clip attachment. Put a cap on a lower end of the square pipe. 5. The square pipe may be set at different heights, depending on the can. Fig.
Page 7
Fig. 7 Fig. 8 3. Press firmly the crank to cut 4. By pressing the crank on the through the can’s lid with a knife. centring plate an optimum position of the can’s edge between the knife and cutting surface is determined. Fig.
Cleaning WARNING! There is a risk of formation of bacteria which may reach the contents of the can and result in health problems. The can opener must be thoroughly cleaned. CAUTION! Do not use any scouring agents that include solvents or corrosive cleaning agents for cleaning.