Advertisement
Quick Links
Advertisement
Related Manuals for Bartscher KB565
Summary of Contents for Bartscher KB565
- Page 1 KB565 A120355...
- Page 2 Bartscher GmbH Phone: +49 5258 971-0 Franz-Kleine-Str. 28 Fax: +49 5258 971-120 Service hotline: +49 5258 971-197 D-33154 Salzkotten Germany www.bartscher.com Version: 1.0 Date of preparation: 2019-10-21 Original instruction manual...
- Page 3 Clamp fastening (prepared for screw fastening) Height-adjustable Auxiliary Equipment (not included in the delivery) Transport wheel KB565 Blade KB565 Spare transport wheel for can opener Spare blade for can opener KB565 KB565 • Material: stainless steel • Material: steel, chrome-plated •...
- Page 4 List of Components of the Appliance Fig. 1 1. Crank 2. Crank handle 3. Bearing 4. Square pipe 5. Clamp handle 6. Cap 7. Eye bolt 8. Clamp plate 9. Clamp attachment 10. Blade 11. Transport wheel 12. Screws in the blade handle Intended Use The can opener is designed for opening cans up to a height of 565 mm.
- Page 5 Assembly Fig. 2 Fig. 3 1. Place the clamp attachment on an 3. The clamp attachment may be even, non-slip surface. additionally attached to the tabletop with 3 bolts by screwing them into 2. Turn the eye bolt until the surface designated holes.
- Page 6 Fig. 5 Fig. 6 3. Pull the square pipe upwards and 4. Press firmly the crank to cut through the can’s lid with the blade. place the can on the clamp attachment, so that it stands directly 5. Press the crank onto the centring next to the pipe and below the plate in order to set the right transport wheel.
- Page 7 8. When the can is opened, lift the crank (Fig. 9). 9. Remove the opened can from the clamp attachment (Fig. 10). Fig. 9 Fig. 10 Cleaning 1. Clean the can opener regularly after the end of each working day, or more frequently if needed.
- Page 8 Cleaning of Blade Fig. 11 Fig. 12 1. Press the crank in the presented 2. To clean the blade, remove it from direction, to disassemble the blade the handle. Proceed the following mechanism. way: – Unscrew the screws in the blade handle.
- Page 9 Maintenance 1. If used intensively, the can opener blade and the transport wheel may get deformed, thus they should be controlled regularly. If the elements are worn out, replace them by contacting the service company. 2. Control the blade handle regularly, and tighten the screws if necessary. Possible Malfunctions Problem Possible Cause...