Vex Robotics Cortex Setup page 3

Setup
Downloading
3. The ROBOTC Firmware enables you to download ROBOTC programs to your robot and utilize
the various debug windows. Go to Robot > Download Firmware and select Download using
Default File to download the ROBOTC Firmware to your robot.
End of Lesson
Once the Download Progress window closes, the ROBOTC Firmware download is complete.
Your robot is now ready to be programmed in ROBOTC.
© 2010 Carnegie Mellon Robotics Academy / For use with VEX Robotics Systems
ROBOTC Firmware
3. Download Progress
A Download Progress window will appear and begin the download process.
When the window closes, the firmware download is complete.
Note: You only need to download the ROBOTC Firmware once.
Switching programs or download methods does not require a re-download.
over USB
(cont.)
Downloading ROBOTC Firmware over USB
ROBOTC
• 3