Basic setting
Software update
Network settings Reset the net-
energy mngmt.
17.2 Changing the basic set-
tings
To call up the basic settings for
1.
the sub-menu, press and hold both
buttons Ajustes 3 seg. for approx.
3 seconds.
Select the required basic setting.
2.
→ "Overview of the basic settings",
Page 56
Adjust the basic setting.
3.
Press Ajustes 3 seg. to call up the
4.
main menu.
Cleaning and servicing
18 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Tips on appliance care
Wipe down the
housing and the
control panel
with nothing but
water and a
damp cloth.
Description
Install the soft-
ware update.
→ Page 55
work settings.
→ Page 55
Connect the ap-
pliance to the en-
ergy manager.
→ Page 53
This ensures the
parts of the appli-
ance will remain
clean and hy-
gienic.
Cleaning and servicing en
Remove all de-
tergent residue,
spray residue or
other residues
immediately.
Keep the appli-
ance door and
detergent drawer
open after use.
18.2 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the Drum clean programme
▶
without laundry.
Add washing powder.
18.3 Cleaning the detergent
drawer
If you change detergent or the deter-
gent drawer is dirty, clean the deter-
gent drawer and the pump unit of the
intelligent dosing system.
Note: Please read the information in
the Safety → Page 4 and Preventing
material damage → Page 10 sections
to ensure that you use the appliance
safely.
Switch off the appliance.
1.
Pull out the detergent drawer.
2.
Fresh deposits
are easier to re-
move without
leaving any
residue.
This allows the
residual water to
dry, reducing
odours in the ap-
pliance.
57