Table of Contents
Advertisement
13.3 Adjusting the pro-
gramme settings
Requirement: A programme has
been set.
→ "Setting a programme", Page 46
Adjust the programme settings.
▶
→ "Buttons", Page 25
Observe the information about op-
erating logic → Page 19.
Notes
¡ The programme settings are not
saved permanently for the pro-
gramme.
¡ The setting is saved if you activate
or deactivate the intelligent dosing
system.
Adjusting additional programme
settings
Press Opciones/Opções to call up
1.
additional programme settings.
Select the programme settings.
2.
Press Opciones/Opções to call up
3.
the main menu.
13.4 Saving the programme
settings
Set the Memoria programme.
1.
Press
to call up the sub-menu.
2.
Select a programme.
3.
Press Main menu to call up the
4.
main menu.
Adjust the programme settings if
5.
required.
a The programme is saved.
13.5 Loading laundry
Notes
¡ Please read the information in the
Safety → Page 4 and Preventing
material damage → Page 10 sec-
tions to ensure that you use the
appliance safely.
¡ To prevent creasing, take note of
the maximum load for the
→ "Programmes", Page 29.
Requirement: The laundry is pre-
pared and sorted.
→ "Laundry", Page 43
Open the door.
1.
Make sure that the drum is empty.
Load the laundry unfolded into the
2.
drum.
Close the door.
3.
Ensure that there is no laundry
trapped in the door.
13.6 Adding detergent and
care product
For programmes in which intelligent
dosing is not possible or desirable,
you can add detergent manually.
Notes
¡ Observe the information on safety
→ Page 4 and preventing material
damage → Page 10.
¡ The dosing recommendation is
aimed at the maximum load for the
programme.
Tip: In addition to intelligent dosing,
you can also add additional care
product for laundry, e.g. stain re-
mover, starch or bleach, to the
manual dosing compartment. Do not
Basic operation en
47
Advertisement
Table of Contents
