Dashr Jump Instructions

Dashr|Jump Components
LED for command
verification with App
Vertec attachment
point
Cylinder for Vertec
vane reset tool
Power cable
USB ports
Visit us online or scan this QR code
to see step by step instructions and
videos for each drill.
www.dashrsystems.com
www.dashrsystems.com
Email: info@dashrsystems.com
Phone: 844.44.DASHR
Barrel Jack
power plug
¼-20 thread for
mounting to the
ball joint
Battery level indicator
V J M
ERTICAL UMP
- U M
SER ANUAL
Dashr uses a mobile application to control Dashr hardware and display testing
results. The free Dashr App can be downloaded from both the Google Play Store
and the Apple App Store. If you do not have an account, please visit
www.dashrsystems.com and go to the Dashboard Login (top of page) to create
one.
The Dashr|Jump system is currently designed to integrate with the Vertec vertical
jump measurement device. But this system will work with any vane based vertical
jump measurement system if you find a way to attach it.
Step 1: Remove the screw and washer that connects the white plastic cylinder at
the base of the vanes.
Required Tools
Step 2: Use the screw and washer to attach the
Dashr|Jump ball-joint coupler.
Step 3: Use the ¼-20 threads to attach the Jump
Module to the coupler. Note that the plastic nut
on the coupler can be used to tighten the
connection. Make sure that the LED is oriented
towards the ground. The power cable will need
to be inserted prior to final alignment.
Step 4: Use the silicon battery strap
(supplied) to attach the rechargeable
Dashr battery to the Vertec.
Results You Can Trust
Jump
EASUREMENT
-
1. Download our App
2. Jump Station Installation