Cadillac XT6 2023 Owner's Manual page 286

Switching Between ACC and
Regular Cruise Control
To switch between ACC and
regular cruise control, press
and hold . A Driver
Information Center (DIC)
message displays. See Vehicle
Messages 0 151.
ACC Indicator ACC Indicator
(Base Level) (Uplevel)
Regular Cruise Control
Indicator
When ACC is engaged, a
green indicator will be lit on
the instrument cluster and the
following gap will be displayed.
When the regular cruise
control is engaged, a green
indicator will be lit on the
instrument cluster; the
following gap will not display.
It is recommended to switch
from ACC to regular cruise
control only, when there are
no vehicles ahead of your
vehicle.
When the vehicle is turned on,
the cruise control mode will be
set to the last mode used
before the vehicle was
turned off.
Warning
Always check the cruise
control indicator on the
instrument cluster to
determine which mode
cruise control is in before
using the feature. If ACC is
(Continued)
Driving and Operating
Warning (Continued)
not active, the vehicle will
not automatically brake for
other vehicles, which could
cause a crash if the brakes
are not applied manually.
You and others could be
seriously injured or killed.
Setting Adaptive Cruise
Control
If is on when not in use,
SET-/RES+ could be pressed
by mistake and engage ACC
when not desired. Keep
when cruise is not being used.
Select the set speed desired
for ACC. This is the vehicle
speed when no vehicle is
detected in its path.
While the vehicle is moving,
ACC will not set at a speed
below a minimum speed,
although it can be resumed.
If equipped with Super Cruise,
this minimum speed is 5 km/h
(3 mph), otherwise, it is
285
off