Chapter 5: Optiplex Micro Pro-2 E Series Monitor Mount - Dell OptiPlex Micro Form Factor Installation Manual

5
OptiPlex Micro Pro-2 E Series Monitor Mount
Steps
1. Follow the instructions in Before working inside your computer.
2. Place the monitor on a soft cloth or cushion.
3. Install the four screws (M2.5x7) to secure the extender to the monitor stand.
4. Install the two screws (M3x6) to secure the AC adapter sleeve (upsell) to the all-in-one stand.
NOTE: The AC adapter sleeve is an optional component that needs to be purchased separately.
OptiPlex Micro Pro-2 E Series Monitor Mount 19