Advertisement
Quick Links
Advertisement
Related Manuals for IMC TADANO AC 2.040-1
Summary of Contents for IMC TADANO AC 2.040-1
- Page 1 BUILD MANUAL TADANO AC 2.040-1 ALL TERRAIN CRANE...
- Page 2 Tadano AC 2.040-1 Build index Model content Model and Parts Tools Pins Transport mode Assembly Operational Mode Jib Assembly Product information Contact...
-
Page 3: Main Components
MODEL CONTENT Main components Counterweights Counterweight Back Plate Lattice swing-away Jib MS Runner Jib Hook weight Outrigger Mats... - Page 4 Tools Hex key Plier Winch key Tweaser Basic crane...
-
Page 5: Transport Mode
Pins Transport mode Pins bag 1 Pins bag 2 Pins bag 3 TRANSPORT CONFIGURATION WITH JIB Pins bag 4 Pins bag 5 TRANSPORT CONFIGURATION... -
Page 6: Operational Mode
ASSEMBLY Operational Mode 2. LIFTING THE BOOM Position the boom upwards in your preferred angle and secure it by fixing the hexagon bolts in the boom cylinder with the Hex Key. 1. OUTRIGGERS Extend the outriggers outwards. Secure the outriggers with the outriggers pins from bag 5. - Page 7 3. USING THE HOIST 4. COUNTERWEIGHT Operate the hoist with the Winch Key. Make Rotate the upper structure 90 sure to keep tension on the rope by adding degrees. the hook weight to the hook. Place the main counterweight on the backside of the crane and push it upwards.
- Page 8 5. CABIN Angle the cabin upwards and pull out the side step with the tools. READY TO START LIFTING! The crane is now build in the normal operational configuration.
- Page 9 Jib Assembly 1. MS RUNNER JIB Place the MS Runner Jib on the left side of the boomhead, for Transport configuration, and lock it in place with PARTS NEEDED pins from bag 4. With the setup you can chose from three boom configuration.
- Page 10 2. LATTICE SWING-AWAY JIB Place the Jib on the boomhead and lock it in place, on both sides, with the pins from bag 4. 3. LATTICE SWING-AWAY JIB The Jib can be angled in a 20 degree and 40 degree angle, and fixed in place with pins from bag 2.
- Page 11 0° 10,5 – 35,2 m 20° 40° 10,5 – 35,2 m 10,5 – 35,2 m 1 0,5 – 35,2 m 1,4 m READY TO START LIFTING! The crane is now build with the Jib configuration.
- Page 12 DIMENSIONS 11143 11082 10648 3000 2423 1559 3289 2724 4848 3510 2750 6450 9222...
- Page 13 If you have any questions, don’t For service and repairs, contact our hesitate to contact us via: service team via: www.imcmodels.eu www.imcmodels.eu > Service info@imcmodels.eu or email to service@imcmodels.eu facebook.com/imcmodels.eu...
- Page 14 Industrial Merchandising Concepts B.V. HEAD OFFICE Peppelkade 23 3992 AL Houten The Netherlands +31 (0)30 721 0661 info@imcmodels.eu...
Need help?
Do you have a question about the TADANO AC 2.040-1 and is the answer not in the manual?
Questions and answers