Activating/Deactivating Wi-Fi - Siemens WT4HW560GC Installation And Operating Instructions Manual

Table of Contents

Advertisement

Carry out the last steps in the
7.
Home Connect app to connect your
appliance.
If the appliance has connected to your
home network successfully, ™©Ÿ è and
| appear in the display and light up
continuously.
If you are not able to establish a
Note:
connection, check whether your
appliance is within range of your home
network. Try connecting manually again.
Connecting to the Home Connect app
If your appliance is connected to your
home network, you can connect it to the
Home Connect app.
Ensure that you are in the Home
Connect menu. ~ Page 35
Make sure that you have opened the
Home Connect app and are logged in.
Set the programme to position 3.
1.
'˜˜ (connect to app) appears in the
display.
Press Start/Pause Ü.
2.
The appliance now attempts to connect
to the Home Connect app.
Once your appliance is displayed in
3.
the app, carry out the last steps in
the Home Connect app.
If you were not able to establish
Note:
a connection, check whether your
mobile end device is within range of
your home network or is connected to
this. Try connecting to the
Home Connect app again.

Activating/deactivating Wi-Fi

If your appliance is already connected
to your home network, you can activate
or deactivate Wi-Fi on your appliance.
Ensure that you are in the Home
Connect menu. ~ Page 35
Set the programme to position 4.
1.
'©Ÿ (Wi-Fi function) appears in the
display.
Press Start/Pause Ü.
2.
If ©Ÿ appears in the display, Wi-Fi is
activated on the appliance. If ©""
appears in the display, Wi-Fi is
deactivated on the appliance.
Notes
If you connect to your home network,
Wi-Fi is activated automatically.
If Wi-Fi is activated, the appliance will
not switch itself off automatically.
If Wi-Fi is switched off on the
appliance, it is not possible to use
the Home Connect app to start or
control the appliance remotely.
If Wi-Fi is switched off and your
appliance was previously connected
to your home network, this
connection will be re-established
automatically when Wi-Fi is switched
back on.
If you activate this function, the
energy consumption increases in
comparison to the values specified
in the consumption value table.
~ Page 52
Home Connect
en
37

Advertisement

Table of Contents
loading

Table of Contents