Partition, Format, And Copy With Ibm Disk Manager 2000 Easy Installation Software - IBM Deskstar 40GV Installation And Reference Manual

Partition, format, and copy with IBM Disk Manager 2000 Easy Installation Software

Note: You may choose to use FDISK to partition and format your hard drive. Refer to the section entitled
FDISK and Format in the Appendix for more information.
Due to system and hard drive variations, the IBM Disk Manager 2000 screens displayed may be
different than those presented here.
Note: Many BIOS setups refer to the drives in a system as 0, 1, and so on. IBM Disk Manager 2000 refers
to drives as 1, 2, etc.
The order and appearance of the screens displayed may vary from system to system. The major
screens are presented here as a guide. Disk Manager 2000 will instruct you on removing the old
drive at the appropriate point in this setup.
1. Turn your computer on.
2. Boot Windows.
3. Insert the Disk Manager 2000 CD into the CD-ROM drive.
4. Select "Install Disk Manager 2000" from the on-screen menu. You should see the following
DM2000 dialog box on your monitor.
5. Select Yes to prepare the new drive.
29