Hitachi CP-X615 Network Manual page 20

3. Management with Web browser software
3.1 Configuring and controlling the projector via a web browser (continued)
The Alert Items are shown below.
Setting Item
Alarm Time
SNMP Trap
Send Mail
Mail Subject
Mail Text
Click [Apply] button to save the settings.
NOTE
• The trigger of Filter Error e-mail is depending on the FILTER
MESSAGE setting in the SERVICE item of the OPTION menu which defines
the period until the filter message is displayed on the projector screen. The
e-mail will be sent when the filter timer exceeds 50, 100, 200, 300, 400, 500,
600, 700 or 800 hours based on the configuration. No notification e-mail will be
sent if the FILTER MESSAGE is set to TURN OFF. (OPTION Menu in the
User's Manual (detailed) – Operating Guide)
• Lamp Time Alarm is defined as a threshold for e-mail notification (reminder) of
the lamp timer. When the lamp hour exceeds this threshold that is configured
through the Web page, the e-mail will be sent out.
• Filter Time Alarm is defined as a threshold for e-mail notification (reminder)
of the filter timer. When the filter hour exceeds this threshold, the e-mail will be
sent out.
0
Configures the time to alert.
(Only Lamp Time Alarm and Filter Time Alarm.)
Click [Enable] check box to enable SNMP Trap alerts.
Click [Enable] check box to enable e-mail alerts.
(Except Cold Start and Authentication Failure.)
Configures the subject line of the e-mail to be sent.
The length of the subject line can be up to 55 alphanumeric
characters.
(Except Cold Start and Authentication Failure.)
Configures the text of the e-mail to be sent.
The length of the text can be up to 1024 alphanumeric
characters.
(Except Cold Start and Authentication Failure.)
Description