Parameter
AMI PCI Bus Driver Version
SR-IOV Support
Change Settings of the Following PCI
Devices
Slot #32 Occupied
Onboard Device_#
Description
Displays the AMI PCI Bus Driver version information.
If the system has SR-IOV capable PCIe devices, this item
Enable/Disable Single Root IO Virtualization Support.
Options available: Enabled/Disabled. Default setting is Enabled.
PCI Latency Timer
– Value to be programmed onto PCI Latency Timer
Register.
Options available: 32/64/96/128/160/192/224/248 PCI Bus
Clocks. Default setting is 32 PCI Bus Clocks.
PCI-X Latency Timer
– Value to be programmed onto PCI Latency Timer
Register.
Options available: 32/64/96/128/160/192/224/248 PCI Bus
Clocks. Default setting is 64 PCI Bus Clocks.
VGA Palette Snoop
– Enable or disable VGA Palette Registers Snooping.
Options available: Enabled/Disabled. Default setting is Disabled.
PERR#
– Enable or disable PCI device to generate PERR.
Options available: Enabled/Disabled. Default setting is Disabled.
SERR#
– Enable or disable PCI device to generate SERR.
Options available: Enabled/Disabled. Default setting is Disabled.
BIOS Setup
- 67 -