Installing The Gpu Card - Gigabyte G242-P35 User Manual

3-6

Installing the GPU Card

Read the following guidelines before you begin to install the GPU Card:
Voltages can be present within the server whenever an AC power source is connected. This voltage
is present even when the main power switch is in the off position. Ensure that the system is
powered down and all power sources have been disconnected from the server prior to installing a
PCIe card. Make sure the system is not turned on or connected to AC power.
Failure to observe these warnings could result in personal injury or damage to the equipment.
Follow these instructions to install the GPU card:
1. Loosen the thumbnail screw securing the GPU card cage in place.
2. Remove the fourscrews securing the GPU card slot bracket and covers in place and remove the
PCIe card slot covers.
3. Insert the GPU card into the selected slot. Make sure the GPU card is properly seated.
4. Install thefour screws to secure the GPU card in place.
1
3
2
4
System Hardware Installation
5
- 31 -