Table of Contents
Advertisement
EN
NOTICE
In case of computers/laptops, a single USB port might not supply enough power to
operate the product. If this happens, connect both USB-A plugs (1 and 2) of the USB-A
power/data cable (H).
- Connect the micro USB plug of the USB-A power/data cable (H) to the micro USB port (USB 2.0)
(A) (Fig. 1). The indicator (E) flashes green once.
NOTICE
The product does not show up as a drive on the computer until a disc is inserted,
then the disc acts as a drive.
4.3 Disconnecting from the power source
1. Close the software being used.
2. On the computer, eject the product drive:
3. After the product drive is successfully ejected, disconnect the USB-A power/data cable (H) from
the computer and the main unit (B).
Windows® Eject Path
Press Windows + E on the keyboard to open File
Explorer. Right-click on the optical drive and select
"Eject" from the pop-up menu.
Mac® Eject Path
Method 1: Right-click on the disc icon on the desktop
and select "Eject" from the pop-up menu.
Method 2: Press Command + Shift + C on the
keyboard to open "Computer" folder. Right-click on
the disc icon and select "Eject" from the pop-up
menu.
Method 3: Drag the disc icon on the desktop to "Bin".
6
Advertisement
Table of Contents
