Connecting To A Power Source - Hitachi GPM1NB10 Instruction Manual

4.2 Connecting to a power source

NOTICE
Do not install the product in an inclined position. It is designed to be operated in a
horizontal position only.
Connection to computer or A/V Device
Connect the drive to the computer as shown in figure.
A. Connect the USB cable (micro plug) to the drive.
B. Connect the other end of the USB cable to your computer.
※ The drive may get its power from the PC USB power. All
systems may not meet USB power requirements and full
performance may not be achieved.
In this case, connect to the USB Y type cable
(not supplied.).
A
5
B