Ate And Time - Hitachi CP-X205 User's Manual And Operating Manual

NETWORK menu
NETWORK menu (continued)
Item
DEFAULT
GATEWAY
TIME
DIFFERENCE
DATE AND TIME
e-SHOT
5
Use the ▲/▼/◄/► buttons to enter the
default gateway (a node on a computer
network that serves as an access point to
another network) address.
This function can only be used when DHCP is set to OFF.
Use the ▲/▼ buttons to enter the time
difference.
Set the same time difference as the
one set on your PC. If unsure, consult
your IT manager. Use the ◄ button to
return to the menu after setting the TIME
DIFFERENCE.
Use the ▲/▼/◄/► buttons to enter the Year (last two digits),
Month, Date, Hour and Minute.
• The projector will override this setting and retrieve the date and
time information from the Time server when SNTP is enabled. (
"Date/Time Settings" section of the User's Manual - Network
Guide)
Use the ▲/▼ buttons to select an item and the ► or ENTER button
to display the image.
Image1
Image2
Image3
Image4
File names of registered images are
displayed by 16 characters or less.
Example: DEMONSTRATION-01
"NEW" stamp is added to the head of line
when the image is registered newly. After
the image is displayed, "NEW" stamp will
be erased. Once an image is displayed,
you can use the ▲/▼ buttons to page
through the images. Use the ◄ or ESC
button to return to the menu.
Pressing the RESET button on the remote control while an image is
being displayed will display the RESET menu. The displayed image
can be deleted from the RESET menu using the ENTER button on
the remote control or the INPUT button on the projector.
If you do not wish to delete the image use the ESC button on the
remote control or push the ◄ and INPUT buttons on the projector at
the same time.
• Items with no image stored cannot be selected.
• Images can be changed using the ▲/▼ buttons while the image
data downloads.
Operation