Panasonic NN-V673SBBPQ Service Manual page 35

8.7. Turntable Motor
1. Remove the motor cover by breaking off at the 8 spots indicated
by the arrows.
2. Disconnect the two lead wires connected to the turntable motor.
3. Remove the turntable motor by removing the two screws.
Note: After breaking off the motor cover, make sure that cut-off portions are properly trimmed off
or bent inside so that no sharp edges are exposed.
Note: To secure the motor cover use a 4 x 6 screw.
Figure 7
Disassembly of the door.
Figure 8
Adjusting the door hinge.
Figure 9
25