Hitachi CP-X2010N User Manual – Operating Manual page 29

Commands Control Description
ERST ? Error Status inquiry
LAMP ? Lamp Status inquiry
INST ? Input Source List inquiry
NAME ? Projector Name inquiry
Manufucturer's Name
INF1 ?
INF2 ? Model Name inquiry
INFO ? Other Information inquiry Responds with the factory information and so on
CLSS ? Class Information inquiry 1
NOTE • The password used in PJLink
the Web Brouwser Comtrol. To use PJLink
any password in Web Browser Control.
• For specifications of PJLink
Machine and Information System Industries Association.
URL: http://pjlink.jbmia.or.jp/
inquiry
, see the web site of the Japan Business
TM
PJLink command (continued)
Parameter or Response
1st byte: Refers to Fan error; one of 0 to 2
2nd byte: Refers to Lamp error; one of 0 to 2
3rd byte: Refers to Temptrature error; one of 0 to 2
4th byte: Refers to Cover error; one of 0 to 2
5th byte: Refers to Filter error; one of 0 to 2
6th byte: Refers to Other error; one of 0 to 2
The mearning of 0 to 2 is as given below
0 = Error is not detected; 1 = Warning; 2 = Error
1st number (digits 1 to 5): Lamp Time
2nd number : 0 = Lamp off, 1 = Lamp on
11 12 21 22 23
Responds with the name set in "PROJECTOR
NAME" of "NETWORK"
HITACHI
CP-X2010N
CP-X2510N
CP-X3010N
is the same as the password set in
TM
without authentication, do not set
TM
29