Advertisement
Charging the Battery
Fig. A
1. Before first use the battery of the device has to be fully
charged.
2. Connect the USB cable with the charger adapter.
Afterwards connect the charger adapter with the lint
remover and a wall socket. The LED on the ON/OFF
switch (1) lights up. The charging time of a completely
spend battery is approx. 8 hours.
Hints:
The LED does not indicate the current state of charge of
the battery.
When the battery is completely discharged, the device
cannot be switched on. In this case, first charge the
battery!
Do not operate the device during charging process.
Operation
Fig. B
1. Press the ON/OFF switch (1), to switch on the device.
2. To turn off the device, press the switch once more.
Fig. C
1. Move the lint remover gently over the clothing you
want to clean. Lightly stretch the textile. Do not press
the shaving foil cap (5) too hard on the textile in order
not to damage the fabrics and the foil cap.
2. While operating, lint will fall into the transparent lint
container (4).
Operation
19
Advertisement
