Table of Contents
Advertisement
SETTING THE DESIRED TEMPERATURE
HOT WATER
EN
22M-1
Use – Heating system
In intervals of 0.5°C, the temperature can be set
from +5°C to +30°C.
Certain models have zone heating.
(KABE Imperial)
With zone heating, the temperatures of zones 1 and 2
can bet set individually.
Zone 1 is the front part of the
motorhome (lounge seating).
Zone 2 is the rear part of the
motorhome (bed).
For hot water, the heating system must be on (bottled gas
or electrical power supply).
In the summer, hot water but no heating of the living
area is desirable. Turn the temperature setting below the
current ambient temperature. The circulation pump will
then not start and there will be no heating of the living
area.
Hot water temperature can be temporarily raised from
50ºC to 65ºC. This provides a greater volume of water at
the desired temperature.
After around 30 minutes, the setting automatically returns
to normal water heating.
While extra hot water is being produced, the circulation
pump is switched off (no heating of the living area).
WARNING!
Risk of burns.
The water's extra high temperature can
cause burns. Take great care when extra
hot water is being produced.
Inform all those concerned that the hot
water is temporarily hotter than usual.
Page
3-27
Advertisement
Table of Contents
