Cisco XR 12416 Installation Manual page 60

Removing and Installing a Chassis
Step 7
Figure 5-42 Closing the Scissor-Jack Platform to Lower the Chassis
Front of chassis
Scissor-jack
screw
Counter-clockwise
expands platform
Step 8
Cisco XR 12416 and Cisco XR 12816 Router Chassis Installation Guide
5-60
Turn the scissor-jack screw clockwise to slowly lower the scissor-jack platform
(Figure 5-42).
Slide the chassis and scissor-jack platform onto a safety hand truck with outrigger
wheels and secure it with the locking safety strap.
Move the chassis to a level solid floor where the chassis can be
–
repackaged for shipping.
– Use the packaging and unpacking instructions that came with the
replacement chassis to repack and ship a defective chassis to the factory.
Chassis anchor
clip and bolt
(2 on each side)
Clockwise
closes platform
Chapter 5 Maintaining the Router
Scissor-jack
platform
OL-17440-01