Advertisement
Using the device
• When the device is off, press any button on the control panel to display the
battery status. The battery/power LED indicator will light up corresponding to
the current battery status.
• Press and hold the
intensity is set to level 1. The battery/power LED indicator will light up blue.
Press the
will now light up purple. Press the
the LED indicator will now light up red. To stop the massage and turn off the
device, press and hold the
• Press and hold the
The default heat setting is set to level 1 (35°C). The battery/power LED indicator
will light up blue. Press the
2 (40°C), the LED indicator will now light up purple. Press the
to increase the heat setting to level 3 (45°C), the LED indicator will now light up
red. To stop the heat massage and turn off the device, press and hold the
button for 3 seconds.
• Press and hold the
The default cold setting is set to level 1 (20°C). The battery/power LED indicator
will light up blue. Press the
2 (15°C), the LED indicator will now light up purple. Press the
to increase the cold setting to level 3 (10°C), the LED indicator will now light up
purple. To stop the cold massage and turn off the device, press and hold the
button for 3 seconds.
Notes
• You can switch between the massage modes when the device is on by pressing
the
/
/
• For the hot and cold massage, the hot & cold massage head must be
attached, as the other massage heads do not support this function.
10
10
button for 3 seconds to start the massage. The default
button again to increase the intensity to level 2, the LED indicator
button for 3 seconds.
button for 3 seconds to start the heat massage mode.
button again to increase the heat setting to level
button for 3 seconds to start the cold massage mode.
button again to increase the cold setting to level
buttons.
again to increase the intensity to level 3,
button again
button again
Advertisement
