View Time Zone 1 / Time Zone 2; Setting Time/Date - TECHTRAIL Trailhead User Manual

SETTING THE INSTRUMENT FUNCTIONS

VIEW TIME ZONE 1 / TIME ZONE 2

Your Enduro instrument allows you to set two separate time
zones. In TIME MODE, Time Zone 2 can be viewed by a
PRESSING the START/LAP key. When viewing Time Zone
2, the display will indicate T2 in the upper left of the display.
PRESS & HOLD the START/LAP
zone display.
NOTES FOR SETTING THE INSTRUMENT
NOTE: When in setting sequence, the variable being
set will blink.
NOTE: When in setting sequence, "+" and "-" icons
are displayed whenever it is possible to increase or
decrease a variable that is being set.
NOTE: If no key is pressed for 60 seconds while in
setting mode, setting mode automatically exits and
changes will not be saved.
NOTE: PRESS SET/CLEAR
sequence.
15
key to change primary time
key to exit setting
SETTING THE INSTRUMENT FUNCTIONS

SETTING TIME/DATE

1. Advance to TIME screen by PRESSING
2. PRESS & HOLD the SET/CLEAR key to enter the setting
sequence.
3. Adjust HOURS by PRESSING the
NEXT keys.
4. Advance to set MINUTES by PRESSING
Adjust by PRESSING the START/LAP
5. Advance to set SECONDS by PRESSING
Adjust by PRESSING the START/LAP
6. Advance to set YEAR by PRESSING
by PRESSING the START/LAP or
( )
CONTINUED NEXT PAGE
the MODE key.
START/LAP or STOP/
the MODE key.
or STOP/NEXT keys.
the MODE key.
or STOP/NEXT keys.
the MODE key. Adjust
STOP/NEXT keys.
16