Download Print this page
EasyPro ES1250 Quick Start Manual

EasyPro ES1250 Quick Start Manual

Submersible pump/filter/uv combo

Advertisement

Quick Links

Submersible Pump/Filter/UV Combo
Thank you for purchasing the EasyPro Submersible Pump/Filter/UV Combo. This
compact all-in-one unit works efficiently to keep the water in your pond or water feature
clear and clean. In addition to removing solids this unit provides biological filtration and
includes a ultraviolet clarifier to kill free floating algae. The UV clarifier has its own plug to
be used only when needed to kill floating algae. A set of nozzles is included to provide the
option of a decorative fountain in your pond.
Please read this instruction booklet carefully before use to assure that you safely and
correctly use this product.
Model
Pump
Voltage
Max Flow
Pond Size
Wattage
Power Cables
Fountain Nozzles
UV-C Lamp
Ballast
Safety and Warnings:
1. Be sure to read and follow all safety instructions
2. Always disconnect the electrical supply before handling,
maintaining, repairing or installing any pond equipment. Do not
immerse or attempt to use a wet plug.
WARNING: Risk of electric shock. Install unit only to a
3.
covered Class A 115 volt GFCI protected receptacle that is
weatherproof with the power unit connect to the receptacle.
4. Provide a "drip loop" with the power cords by making a "loop" of cord
below the power receptacle. This prevents water from traveling along the cord into the receptacle.
5. This unit has not been approved for use in swimming pools or spas.
6. Do not use if power cord is damaged. Cord is not repairable and damaged unit should be discarded.
7. The integrated pump must be fully submersed underwater at all times when operating. Never let the pump
run dry, as this can damage the impeller or overheat and possibly burn out the pump.
8. Do not use to pump oil or other non-intended liquids.
DANGER: Do not operate the UV lamp outside the housing of the unit. UV radiation can be harmful to
9.
skin and eyes.
ESF1250
650 GPH Mag Drive
115 Volt/60Hz
650 GPH
250-1250 Gallons
50 Watts
15 feet
Three-tier, two-tier, waterbell
11 Watt
cUL listed 115V / 60Hz
ESF1250

Advertisement

loading
Need help?

Need help?

Do you have a question about the ES1250 and is the answer not in the manual?

Questions and answers

Summary of Contents for EasyPro ES1250

  • Page 1 ESF1250 Submersible Pump/Filter/UV Combo Thank you for purchasing the EasyPro Submersible Pump/Filter/UV Combo. This compact all-in-one unit works efficiently to keep the water in your pond or water feature clear and clean. In addition to removing solids this unit provides biological filtration and includes a ultraviolet clarifier to kill free floating algae.
  • Page 2 UV Installation and Maintenance WARNING: Disconnect the unit from power source before performing any maintenance or installation on the unit. USE A CLEAN CLOTH TO HANDLE THE UV LAMP, TOUCHING THE LAMP CAN GREATLY REDUCE ITS LIFE Instructions for replacing and cleaning UV lamp and quartz sleeve. Periodic cleaning of the quartz sleeve may be necessary for the UV light to reach the bacteria.
  • Page 3 Installation & Operation Maintenance WARNING: Disconnect the unit from power Refer to previous page for UV lamp and quartz source before performing any maintenance sleeve replacement. Filter pads and media are or installation on the unit. wearable items that may be replaced periodically. 1.
  • Page 4 Warranty does not cover any cost associated with the installation or removal of the product subject to warranty claim. An RA number must be obtained by calling EasyPro Pond Products at 800-448-3873. It is your responsibility to pay the return shipping charges. Be sure to include the RA number, original receipt (in the form of an invoice or sales receipt), name, return address, and phone number inside of the package.