AEG L8FEE162V User Manual page 20

Table of Contents

Advertisement

20
www.aeg.com
Programme
Outdoor
Anti-Alergia
1) During this cycle the drum rotates slowly to ensure a gentle wash. It can seem that the drum doesn't
rotate or doesn't rotate properly, but this is normal for this programme.
2) If you set a Steam programme with dried laundry, at the end of the cycle the laundry can be humid.
Line dry the items for about 10 minutes.
3) Steam programme doesn't remove particularly intense odour.
4) Tested for Staphylococcus aureus, Enterococcus faecium, Candida albicans, Pseudomonas aerugino‐
sa and MS2 Bacteriophage in external test performed by Swissatest Testmaterialien AG in 2021 (Test
Report No. 202120117).
Programme temperature, maximum spin speed and maximum load
Programme
Washing programmes
Programme description
Do not use fabric softener and make sure that
there is no softener residue in the detergent
dispenser.
Outdoor clothing, technical, sport fabrics, waterproof and
breathable jackets, shell jackets with a removable fleece
or inner insulation. The recommended laundry load is 2.5 kg.
This programme can also be used as water-repellent restoring
cycle, specifically tailored for treating clothes with a hydropho‐
bic coating. To perform the water-repellent restoring cycle, pro‐
ceed as follows:
Pour the washing detergent in the compartment
Pour a special water-repellent restorer for fabric in the
drawer compartment for fabric softener
Reduce the laundry load to 1 kg.
To further improve the water-repellent restor‐
ing action, dry the laundry in a tumble dryer by
setting the Outdoor drying programme (if avail‐
able and if the garment care label permits tum‐
ble drying).
White cotton items. This high-performance wash program
combined with steam vapour, removes more than 99,99% of
4)
bacteria and viruses
throughout the washing phase; with an additional action on the
fibers thanks to a vapour phase, an enhanced rinsing phase
ensures a proper removal of detergent and micro-organism
residues. This program ensures also a proper reduction of pol‐
lens/allergenic items.
Default tempera‐
Reference spin speed
ture
Spin speed range
Temperature
range
keeping the temperature above 60°C
.
.
Maximum
load

Advertisement

Table of Contents
loading

Table of Contents