Subscribe to Our Youtube Channel
Related Manuals for Bellini BPD170EG
Summary of Contents for Bellini BPD170EG
- Page 1 INSTALLATION & OPERATION INSTRUCTIONS 60cm Electric Oven & 60cm Gas Glass Cooktop BPD170EG GSM Retail Australia Pty Ltd ABN: 53 007 582 475 For Warranty and technical queries: 1300 373 199 Aust 0800 764 912 NZ V5 Aug22 www.belliniappliances.com.au...
- Page 2 60cm 9 Function Touch Oven Model No. BDOM609TCX FINELINE: 5103647 Aus Only BDOM609TCX-F INCLUDED IN BUILDERS PACKS:BPD170EG & BPD270EC GSM Retail Australia Pty Ltd ABN: 53 007 582 475 For Warranty and technical queries: 1300 373 199 Aust 0800 764 912 NZ www.belliniappliances.com.au u...
- Page 3 Th ank you Thank you for choosing Bellini Appliances. All Bellini appliances carry a 3 year In Home warranty, be sure to retain your installation and user manual and receipt. For all warranty and technical queries please contact Australia 1300 373 199...
-
Page 4: Table Of Contents
Content Safety instructions----------------------------- 2 Product description---------------------------- 4 Installation----------------------------------------7 Start Using your Oven--------------------------9 Troubleshooting---------------------------------12 Maintenance and cleaning -------------------13 Warranty------------------------------------------ 15... -
Page 5: Safety Instructions
The manual should be kept in a safe place for future reference. In case of failure, only the Authorised Technical Service may repair this oven. Otherwise the guarantee will be null and void. All Bellini Appliances are for domestic use only. General Warnings Child Safety ... - Page 6 To reduce the risk of fire, do not place or install Do not use the door as a shelf. this unit in areas where the ventilation or Do not push down when the oven door is open. circulation ducts may become blocked.
-
Page 7: Product Description
Product Description LED display Function Pad Clock setting button Alarm Timer/Delay start setting button Function setting button Decrease setting button Increase setting button Temperature/Cooking Time setting button Stop button Start button Door Handle 3 Layers Glass Door... - Page 8 Accessory Name Picture Quantity Baking tray 1 pair Grill rack Screws(ST4x3 ) 2 pairs and Distant holder Rubber stopper Technical Specifications product dimensions usable electrical max. power net weight (h x w x d) mm capacity connection rating 70 litres Approx.
-
Page 9: Installation
Installation WARNING! Please follow the points below when installing the appliance Use An Authorized Person available from the vinyl-wrap supplier. As stated in the local municipal building codes GSM cannot accept responsibility for damage and other relevant statutory regulations: caused by installation into low temperature ... - Page 10 Hard Wired Appliances : When making the mains supply conductor connections to the terminal block within the terminal box , please ensure that minimum clearances are being maintained between individual conductors and conductors/connectors to the adjacent metal surfaces of the terminal box itself , where possible add heat shrink sleeves to any bare conductor end/ connectors prior to securing.
-
Page 11: Start Using Your Oven
Start Using Your Oven Notes: When using oven for the first time, you need to burn the oven in for approximately 1 Hour at 240 Degrees to remove any smells from the oven. During this time light smoke may emit from the oven( This is normal ), so please ventilate kitchen by opening windows during this time. - Page 12 Function Description Switch off function Oven Light Enables the user to observe the progress of cooking without opening the door Defrost The circulation of air at room temperature enables quicker thawing of frozen food, (Without the use of any heat). It's a gentle but quick way to speed up the defrosting time and thawing of ready-made dishes and cream filled produce etc.
- Page 13 Cooking setting Only when oven in standby mode, one can set cooking function follows below steps: 1. Press function setting button “ ” to set the cooking function you want. Press Function setting button “ ” successively, you can switch for different function, follows sequence 2.
- Page 14 5. Press start button “ ” to confirm delay start function. The delay start function icon “ ” and clock time will illuminate on display. Note: -The time set for auto start, must be after current clock time! -After delay start setting, you can check the setting auto start time, by press clock time button “ ”, the auto start time will illuminate for 3 seconds.
-
Page 15: Troubleshooting
Troubleshooting In the event of an emergency, you should: Switch OFF all controls of the appliance Disconnect the mains plug Call the service centre Some minor faults can be fixed by referring to the instructions given in the table below. Before calling the customer support centre or the service centre check the following points that are presented in the table. -
Page 16: Maintenance And Cleaning
Maintenance and Cleaning WARNING! Before cleaning your oven, or performing maintenance, disconnect it from the power supply. Do not use steam cleaners. Do not line the oven bottom with aluminium foil, as the consequent accumulation of heat could compromise the cooking and even damage the enamel. ... - Page 17 Replacement Of The Oven Light Bulb WARNING! In order to avoid the possibility of an electric shock ensure that the appliance is disconnected from the power supply before replacing the bulb. Set all control knobs to the “OFF” position (● / 0) and disconnect the mains plug .
-
Page 18: Warranty
Consumer until the expiry of three (3) year (Warranty Period). If within the Warranty Period a manufacturing defect is discovered in the Bellini product or it fails to perform to the Company’s specifications as a result of some defect in materials, components or workmanship (Defect) then the Company will, at its option, repair the Bellini product or supply a replacement Bellini product free of charge. - Page 19 1.10 If you are required to transport the Bellini product to the Company or its service agent, you must ensure it is safely disconnected by a qualified tradesman and securely packed and insured. The Company does not accept any responsibility for loss or damage of the Bellini product prior to it being received by the Company or its service agent.
- Page 20 60 cm Black Glass Gas Cooktop Model No. BDGM604 BDGM604-F Only In Builders Pack BPD170EG FINELINE: 5103597 Aus/NZ GSM Retail Australia Pty Ltd ABN: 53 007 582 475 For Warranty and technical queries: 1300 373 199 Aust 0800 764 912 NZ...
- Page 21 Th ank you Thank you for choosing Bellini Appliances. All Bellini appliances carry a 3 year In Home warranty, be sure to retain your installation and user manual and receipt. For all warranty and technical queries please contact Australia 1300 373 199...
- Page 22 Content Safety instructions----------------------------- 3 Installation----------------------------------------4 Product description---------------------------- 9 Start using your appliance--------------------11 Maintenance ------------------------------------13 Warranty------------------------------------------ 24...
- Page 23 If the appliance is sold or transferred to another person, ensure the booklet is passed on to the new user. accident caused by misuse in advance, and use the appliance more conveniently. ***All Bellini Appliances are for domestic use only** Neglect of this mark may result in severe personal injury or Danger/Warning death.
- Page 24 installation Warning accordance with regulations in force gas and electrical supply complies and only used in a well ventilated with the type stated on the rating space. plate. marine craft or in caravans, it should not must be installed in such a way that be used as a space heater.
- Page 25 child and people safety Warning The appliance gets hot when it is in use. Children should be kept away until it has cooled. Caution from using the appliance safety without supervision or instruction by a responsible person to ensure that they can use the appliance safety.
- Page 26 during use Warning Burner panel is not designed to operate food. from an external timer or separate remote control system. comes The use of a gas cooking appliance results in the production of heat and moisture in contact with water. Do not operate the room in which it is installed.
- Page 27 during use materials in the storage drawer aerosols may be affected by heat and should not stored above or below the near this appliance. appliance. this appliance while it is in operaiton. ‘ ’ position when not in use. Caution industrial purposes.
- Page 28 cleaning and service Warning cleaning agents. repaired or serviced by an authorised technician Service and only genuine approved spare parts should be used. Caution and cooled. clean the appliance. environmental information with due regard to safety and the environment. unusable, by cutting off the cable. disposed with other household wastes at the end of its working life.
- Page 29 description of the appliance GM604/BDGM604-F Model Pan Support Cast Iron W ok pan Suppor t Top Plate Glass 600*510* 10 i mension(W*D* H Ignition device Contin u u ous Ignition Ty p Gas Connection G 1/2 thread Electric supply 220- 240 V V ac,50Hz-60Hz, WO K...
- Page 30 INSTALLATION & OPERATION INSTRUCTIONS 60 cm Black Glass Gas Cooktop Model No. BDGM604 BDGM604-F Only In Builders Pack BPD170EG FINELINE: 5103597 Aus/NZ Cast iron trivet Test Point Adaptor(1) I nj ector ( 4 ) Gas-pipe bend (1) Bellini Instruction Manual(1)
- Page 31 how to use the appliance Automatic ignition with flame failure safety device To ignite a burner: o Press in the control knob of the burner that you wish to light and turn it anti-clockwise to the maximum position. o If you keep the control knob depressed, the automatic ignition for the burner will operate.
- Page 32 safety and energy saving advice - The diameter of the bottom of the pan should correspond to that of the burner. ■ Do not use cookware that BURNERS overlaps the edge of the 200mm 240mm burner. Semi-Rapid 160mm 120mm 160mm lid half off one side.
- Page 33 cleaning and maintenance ■ Cleaning operations must only be carried out when the appliance cool. completely ■ The appliance should be disconnected from your mains supply before commencing any cleaning process. ■ Clean the appliance regularly, preferably after each use. ■...
- Page 34 cleaning and maintenance from the top plate. detergent or washing up liquid cloth and wipe dry with a clean cloth. blocked. 1 2 3 spreader into their respective recesses. Replace parts in the correct order after cleaning. - Do not mix up the top and bottom. - The locating pins must fit exactly into the notches.
- Page 35 using instructions Warnings ■ Do not modify this appliance. ■ This appliance must be installed by an authorised technician or installer. ■ Prior to installation, ensure that the local distribution conditions (nature of the gas and gas pressure) and the adjustment of the appliance are compatible.
- Page 36 positioning 600mm 700mm BDGM604/ BDGM604-F 400mm 400mm FO 0813 ■ This appliance is to be built into a kitchen unit or mm worktop, providing the following minimum distances are allowed ; o The edges of the hob must be a minimum distance of mm from a side or rear wall.
- Page 37 installing the appliance appliance upside down and place it on a cushioned mat. supervision devices are not damaged in this operation. 2. Apply the Self Adhesive strip provided around the edge of the appliance. 3. Do not leave a gap in the Self Adhesive strip or overlap the thickness.
- Page 38 B: Look tightly a replaceable gas-type fitting onto the main gas tube. GSM Retail Australia Pty Ltd ABN: 53 007 582 475 For Warranty and technical queries: 1300 373 199 Aust OR 0508123108 NZ www.belliniappliances.com.au Model: BDGM604 Only In Builders Pack BPD170EG FINELINE: 5103597 Aus/NZ 60cm Black Glass Gas Cooktop...
- Page 39 connection Statutory requirements This installation must conform with the following: ■ Manufacturer’s Installation instructions ■ Local Gas Fitting Regulations ■ Municipal Building Codes ■ Refer to AS/NZS 5601.1 for Gas Installations ■ S.A.A. Wiring Code ■ Local Electrical Regulations ■ Any other statutory regulations Preparing to install Refer to AS/NZS 5601.1 for piping size details.
- Page 40 Gas Connection Install in accordance with relevant gas standards and/or codes of practice applicable. Connect the elbow fitting to the appliance gas manifold connection, and check that seals between the elbow and manifold connection are in place and in good condition.
- Page 41 electrical connection 220-240V, 50Hz-60Hz - Green/yellow = Earth - Blue = Neutral - Brown = Live The wire which is coloured green and yellow must be connected to the terminal which is marked with the letter E or by the earth symbol.
- Page 42 adjustment ■ Take precautions on the operations and adjustments to be carried out when converting from one gas to another. ■ All work must be carried out by a qualified technician. ■ Before you begin, turn off the gas and electricity supply to the appliance. injector in place.
- Page 43 trouble shooting Repairs should be performed by a licensed technician only. Improper repair may result in considerable danger to you and others. Problem Probable cause Solution No Spark. Check the electricity supply Not ignited The gas supply is closed. The gas supply is not completely Badly ignited open.
- Page 44 Consumer until the expiry of three (3) year (Warranty Period). If within the Warranty Period a manufacturing defect is discovered in the Bellini product or it fails to perform to the Company’s specifications as a result of some defect in materials, components or workmanship (Defect) then the Company will, at its option, repair the Bellini product or supply a replacement Bellini product free of charge.
- Page 45 1.10 If you are required to transport the Bellini product to the Company or its service agent, you must ensure it is safely disconnected by a qualified tradesman and securely packed and insured. The Company does not accept any responsibility for loss or damage of the Bellini product prior to it being received by the Company or its service agent.
Need help?
Do you have a question about the BPD170EG and is the answer not in the manual?
Questions and answers