Positioning and connecting
en
Take the hoses out of the holders.
1.
Unscrew and remove all four
2.
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
Insert the covers. Lock the covers
3.
firmly in place by applying pressure
to the snap-in hooks.
Hose and cable lengths
Left-hand connection
■
46
Right-hand connection
■
The following are available from
Tip:
specialist dealers/customer services:
Extension for Aqua-Stop and cold
■
water supply hose (approx. 2.50 m);
order no. WM Z2380, WZ 10130,
CZ 11350, Z 7070X0
A longer supply hose
■
(approx. 2.20 m) for standard
models; individual component
number for customer services:
00353925
Water inlet
:
Warning
Danger of death!
There is a risk of electric shock if you
touch live components.
Do not immerse the Aqua-Stop safety
valve in water (it contains an electric
valve).
Notes
Only operate the washing machine
■
using cold mains water.
Do not connect the machine to the
■
mixer tap of an unpressurised hot-
water boiler.
Do not use a used supply hose. Only
■
use the supply hose supplied or one
that was purchased from an
authorised specialist retailer.
Do not kink or squash the water
■
supply hose.