Advertisement
Quick Links
Advertisement
Related Manuals for Skyvue OBX 32000
Summary of Contents for Skyvue OBX 32000
- Page 1 OBX 32000 / 4270 / 4770 / 5570 Tilt Mount Installation Manual...
-
Page 3: Tools Required For Installation
Included in the tilt mount kit: 2- Mounting Arms 4- 5/16”x 2 ½” Lag Screws (47” shown) 1- Mounting Plate 4- 5/16” Lag Shields 2- Locking Bars 4- 5/16” Flat Washers Tools Required for Installation: Masonry Wood 1/2” 1/2” 3/16” Ratchet with 1/2”... - Page 4 Lay blanket down on flat sturdy surface. Run hand over surface to make sure there are no sharp object or protrusions, when the television is laying down. Lay television down, viewing side down on blanket. ® All Rights Reserved. 2015 SkyVue...
- Page 5 Remove and set aside the 4 bolts and washers as indicated with the red circles from the clamp nuts. Do not remove the tamper proof screws located in the back of television, doing so will void the tevelvision’s warranty. Align Holes Secure Bolts Note: Both knobs need to face the...
- Page 6 With wood bit, drill 3/16” pilot hole. Hold the plate to the wall. Make sure the plate is level. Using the 4 supplied lag bolts and washers secure plate to the wall. ® All Rights Reserved. 2015 SkyVue...
- Page 7 With the help from a friend, lift the television and attach the hooks on the mounting arms to the plate on the tilt mount. Tighten knobs on arms once the tilt is set correctly for the television. Insert locking bars and secure by fastening with a pad lock for added security.
Need help?
Do you have a question about the OBX 32000 and is the answer not in the manual?
Questions and answers