The Pump Fed Sanitizer with SS Trigger Gun is a spray applicator for applying chemical solutions, such as sanitizers in food processing facilities, to a variety of
surfaces at 1.7 GPM @ 40 PSI. This unit receives ready-to-use chemical solution from a central chemical feed system and projects it through the hose, trigger gun,
wand and fan nozzle. Alternate flow rates are available upon request.
Lafferty Equipment Manufacturing, LLC • 5614 Oak Grove Road • North Little Rock, Arkansas 72118
Lafferty Equipment Manufacturing, LLC
Installation & Operation Instructions
Model # 919158 · Pump Fed Sanitizer W/ SS Trigger Gun
Page 1
1.7 GPM @ 40 PSI. This unit receives ready-to-use chemical solution from a central chemical feed system and projects it through the hose, trigger gun, wand and fan nozzle. Alternate flow rates are available upon request. Lafferty Equipment Manufacturing, LLC • 5614 Oak Grove Road • North Little Rock, Arkansas 72118...
Page 2
919158 • Pump Fed Sanitizer W/ SS Trigger Gun SAFETY & OPERATIONAL PRECAUTIONS UNIT FLOW RATES For proper performance do NOT modify, substitute nozzle, hose diameter or length. Manufacturer assumes no liability for the use or misuse of this unit.
Page 4
919158 • Pump Fed Sanitizer W/ SS Trigger Gun Troubleshooting Guide Possible Cause / Solution Problem Startup Maintenance A) Weak pressure or will not spray 1, 2, 3, 4 5, 6 Possible Cause / Solution Startup Maintenance 1. Inlet or discharge not completely open 5.