Remoteupdate - Miele WWD660 Operating Instructions Manual

Programmable functions
 RemoteUpdate
The RemoteUpdate function is used for
updating the software in your washing
machine. If an update is available for
your washing machine, it will
automatically download it. Updates will
not be installed automatically. They
must be initiated manually.
If you do not install an update, you can
continue to use your washing machine
in the usual way. However, Miele
recommends installing updates.
Running a RemoteUpdate
Information about the content and
scope of an update is provided in the
Miele App.
The message  will appear in the time
display if an update is available.
You can install the update immediately
or postpone this until later. When the
washing machine is switched on again,
you will be reminded about the update.
Deactivate RemoteUpdate if you do not
want to install any updates.
The update may take several minutes.
Please note the following information
about the RemoteUpdate function:
- You will only receive a message when
an update is available.
- Once an update has been installed, it
cannot be undone.
- Do not switch off the washing
machine during an update.
Otherwise, the update will be aborted
and will not be installed.
88
- Some software updates can only be
carried out by a Miele service
technician.
Switching on/Switching off
The RemoteUpdate function is
activated as standard. Available
updates will be downloaded
automatically but will only be installed if
you initiate the installation manually.
Deactivate RemoteUpdate if you do not
want any updates to be downloaded
automatically.
Options
 = RemoteUpdate is deactivated
 = RemoteUpdate is activated
(factory default)
Starting the update
After the washing machine is switched
on,  appears in the time display.
 Touch the Start/Add laundry sensor.
 starts to flash in the time display.
The update starts.
Bars in the time display show the
progress of the update:
 = 0 %
 = 100 %