Figure 6-9: Line 1 Status - Cisco Linksys SPA3102 User Manual

Voice gateway with router
Hide thumbs Also See for Linksys SPA3102:
Table of Contents

Advertisement

RTP Bytes Sent. Displayed here is the number of RTP bytes sent by the Voice Gateway.
RTP Packets Recv. Displayed here is the number of RTP packets received by the Voice Gateway.
RTP Bytes Recv. Displayed here is the number of RTP bytes received by the Voice Gateway.
SIP Messages Sent. Displayed here is the number of SIP messages sent by the Voice Gateway.
SIP Bytes Sent. Displayed here is the number of SIP bytes sent by the Voice Gateway.
SIP Messages Recv. Displayed here is the number of SIP messages received by the Voice Gateway.
SIP Bytes Recv. Displayed here is the number of SIP bytes received by the Voice Gateway.
External IP. Displayed here is the external IP address used for NAT mapping.
Line 1 Status
Hook State. Displayed here is the status of the Internet phone line's readiness. On indicates that it is ready for
use, while Off indicates that it is in use.
Registration State. Shown here is the status of the line's registration with the ITSP.
Last Registration At. Shown here are the last date and time the line was registered.
Next Registration In. Shown here is the number of seconds until the next registration.
Message Waiting. This indicates whether you have new voicemail waiting.
Call Back Active. This indicates whether a call back request is in progress.
Chapter 6: Using the Web-based Utility
The Voice Tab
Voice Gateway with Router

Figure 6-9: Line 1 Status

33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents