Operation - VOLTCRAFT VC100WC-3 Operating Instructions Manual

Operating instructions
VC100WC-3 Car USB-C charging adapter, 100 W
TM
Item No. 2476162
1 Intended use
This product is designed to charge and power USB devices in a vehicle. It can be operated with
a 12 or 24 V on-board voltage. Power is supplied via a cigarette lighter socket.
The product is intended for indoor use only. Do not use it outdoors. Contact with moisture must
be avoided under all circumstances.
Using the product for purposes other than those described above may damage the product.
Improper use can cause a short circuit, fire or other hazards.
This product complies with statutory, national and European regulations. For safety and
approval purposes, you must not rebuild and/or modify the product.
Read the operating instructions carefully and store them in a safe place. Make this product
available to third parties only together with the operating instructions.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.
2 Delivery content
Charging adapter
3 Latest product information
Download the latest product information at
shown. Follow the instructions on the website.
4 Symbols in this document
This symbol warns of hazards that can lead to personal injury. Read the information
carefully.
5 Safety information
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling, we assume no liability for any resulting personal injury or
damage to property. Such cases will invalidate the warranty/guarantee.
5.1 General information
This product is not a toy. Keep it out of the reach of children and pets.
Do not leave packaging material lying around carelessly. It may become a dangerous
plaything for children.
Should you have any questions or concerns after reading this document, please contact
our technical support or a professional technician.
Maintenance, modifications and repairs must be carried out by a technician or a specialist
repair centre.
5.2 Handling
Please handle the product carefully. Impact, shocks or a fall even from a low height can
damage the product.
5.3 Operating conditions
Do not place the product under any mechanical stress.
Protect the product from extreme temperatures, strong jolts, flammable gases, vapours,
and solvents.
Protect the product from high humidity and moisture.
The product must not be exposed to direct sunlight.

5.4 Operation

Consult an expert when in doubt about the operation, safety or connection of the device.
Never use the product immediately after it has been taken from a cold room into a warm
one. This may cause condensation to form, which can destroy the product. Allow the
product to reach room temperature before using it.
Never leave the product and the connected device unattended during use.
Unplug the product while it is not in use.
The product may heat up during use. Ensure that there is sufficient ventilation. Do not cover
the product during use.
Never short circuit the outputs on the product.
Operating instructions
www.conrad.com/downloads or scan the QR code
If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. DO NOT attempt to repair the product yourself. Safe operation can no
longer be guaranteed if the product:
– is visibly damaged,
– is no longer working properly,
– has been stored for extended periods in poor ambient conditions or
– has been subjected to any serious transport-related stress.
5.5 Connected devices
Always switch the connected device off before connecting/disconnecting the product.
Always observe the safety information and operating instructions of any other devices
which are connected to the product.
6 Operating elements
1
2
1 USB-C port 3 Adapter plug
TM
2 USB-C cable 4 Status LED
TM
7 Operation
Always switch off the desired device before connecting it to the charging adapter.
Ensure that the connection is correct. If the product is not connected properly, it
could overheat or cause an electric shock or fire.
Ensure that your device is suitable for the connection ratings of the product (see
"Technical data" section).
Charging a USB device
1
1. Connect the switched-off USB device to the product. Use either the integrated USB-C
cable (2) or a suitable cable for the USB-C
2. Plug the adapter plug (3) into the cigarette lighter socket in your vehicle. The status LED (4)
on the product will light up to indicate that the product is ready for use.
The USB device will now charge. If you wish to use the USB device, you may now
Æ
turn it on.
Disconnecting a USB device
2
1. Switch the USB device off.
2. Disconnect the product from the cigarette lighter socket.
3. Disconnect the USB cable from the product.
Important:
– You can use the product when the engine is on or off. However, you should not start
the engine when the product is connected, as the power supply to the cigarette lighter
socket is interrupted at start-up (on some vehicle models).
– If the engine is switched off, charging over a longer period of time will discharge the
vehicle battery.
5 USB-A port
port (1) / USB-A port (5).
TM
3
4
5
TM