Party Warehouse Electron Instructions

6m x 12m Peg & Pole Instructions
Thank you for choosing a Party Warehouse Marquee for your event.
S
ome Basic Rules:
Please do not drag or walk on any marquee sections
Please do not stick adhesive tape to the walls. This leaves a residue which is difficult
to remove. Use the poles if you wish.
Please do not light fires, including braziers, close to the marquee. Do your best to
ensure the marquee is up wind of any fire however small, as the smoke and ash will
stain the marquee. If using heaters ensure that direct heat is not applied to the
marquee roof or walls.
TAKE CARE!! If you are unsure on anything, please do not hesitate to contact us, we
will be happy to guide you through any stage of the set up process.
Have a good time as that is what the marquee is there for. How ever just apply
common sense and ensure that party goers do the same. The material is a high
quality PVC and is highly durable; however excess weight or sharp objects will cause
it to tear.
1) Preparing the Roof:
Lay the marquee roof section out flat on the ground, this will be the area covered
by the marquee once erected.
6m x 12m Peg & Pole Electron Marquee Setup Instructions (1 piece roof) – Party Warehouse. Page 1 of 3
(Electron - 1 piece roof)