Page 1
Part No. 4599 Digital Torque Adaptor 1/2"D Instructions www.lasertools.co.uk...
Page 2
Instructions This Torque adaptor can be used with any 1/2"D power bar or ratchet. The tool enables the correct torque to be set on any fastener, ranging from 40-200Nm. Calibration mode The Adaptor will enter into Calibration mode if Mem and are pressed simultaneously.
Page 3
Instructions Torque Setting • Select M and Trace button together to select the required measurement. • A pointer on the top of the LCD display indicates the torque setting. • Torque settings include: Kg-cm 408 - 2040 Kg-m 4.08 - 20.4 In-lb 354 - 1770 Ft-lb...
Page 4
Safety Warnings - please read • Store in a clean, dry place. • Clean with a soft dry cloth. • Never submerge in water. • Do not exceed the permitted torque settings. • Do not expose to extreme temperature, humidity or direct sunlight. Our products are designed to be used correctly and with care for the purpose for which they are intended.