Removing The Nozzle Ring; Fig. 45: Removing The Nozzle Ring - ABB 1240027 Operation Manual

Operation Manual / A130-H.. - A140-H..
9 Dismantling and fitting / 9.9 Removing the nozzle ring
9.9

Removing the nozzle ring

Fig. 45: Removing the nozzle ring
1. If present: Remove the metal C-ring (51105).
2. Position the fastening strips (51002) in place.
3. Pull out the nozzle ring (56001) with the two extraction devices (90070) and the service
support base (90012).
4. Remove the lamellar sealing ring (56005).
5. Remove the burst ring (57210).
© Copyright 2021 ABB. All rights reserved. HZTL4030_EN Rev.G July 2021