Fig. 21: Connecting The Compressor Cooling Air Intake; Fig. 22: Attaching The Support - ABB 1240027 Operation Manual

Operation Manual / A130-H.. - A140-H..
3 Removing and Installing / 3.3 Installing the turbocharger
3.3.6 Connecting the turbocharger
Connect the cable to the speed sensor (86515).
u
Connect all exhaust gas, water, blow-by and air lines according to the instructions of the
u
enginebuilder.
Version with compressor wheel cooling
CAUTION
Failure of compressor wheel cooling
Any prolonged failure of the compressor wheel cooling will shorten the re-
placement interval of the compressor wheel.
Make sure there is an uninterrupted supply of cooling air during opera-
u
tion.
Fig. 21: Connecting the compressor cooling air intake
Remove the screw plug on the connection for the compressor wheel cooling (06) and fit
u
the cooling air line.
3.3.7 Attaching the support
Fig. 22: Attaching the support
If present: Attach support (61301) to engine support or to a connecting piece.
u
© Copyright 2021 ABB. All rights reserved. HZTL4030_EN Rev.G July 2021